Recently active
I wasn't able to leave a comment in the other area for some reason, but, well, congrats! Definately a worthy Champion!
I've posted this in a couple of areas, including CS and Ideas.Problem is the extra space character in detail view callouts and section view callouts.I don't know if this was always this way and I just hadn't noticed it, or if it was accidentally introduced recently.Now that I know about it my OCD kicked in and "I MUST SAVE THE WORLD!" by ridding every detail and section view of superfluous spaces.Please tell me your version of Pro/E, WF, or Creo doesn't behave this way...
Freeware is the key....Does it exist?Happy Friday
The help, at least how it shows for me, is slightly off. You need not use the "[" or "]". In the help, it shows as:for superscripted [@+text@#] and to create subscripted text, type [@-text@#] WHEN TYPING A NEW NOTE, YOU NEED NOT PUT IN THE BRACKETS:SUPERSCRIPTED TEXT BELOW:text @+text@#, so 2^3 is: 2@+3@#SUBSCRIPTED TEXT BELOW:text @-text@# WHEN LOOKING AT THE PROPERTIES (AS FOR EDITING) IT SHOWS AS:SUPERSCRIPTED TEXT BELOW:2{2:@+3@#}SUBSCRIPTED TEXT BELOW:2{6:@-3@#}
Hello,I got some stl files from the software guys at my company. When I tried to open them in Creo they would not display in the file open window, even when I selected all files. I have been told that Creo will only display files it can open, which in my opinion is silly. When you select all files you should actually get to see all the files. Anyway, I then used blender to open the .stl and it works fine. I exported it with blender as a new .stl with a different name and tried to use Creo to open that file. This time it does show it as an .stl file but when I open it I get the message 'Could not read STL file.' I tried exporting it as ascii as well, but no change.Anyone have any ideas? The .stl format is pretty standardized I can not understand why a free program like blender can open the file and my powerful ProE program can't. Attached is one of the stl files. Thanks for the help, and sorry for my frustration. I hate when simple things become complicated.Josh
Is the ARX really worth paying for as an add-on? How much is it and what is the maintenance?
I'm really struggling with this issue. Does anyone know how to create a nice, visually pleasing möbius strip in Creo Schools addition? Here is what I really want the model to look like: http://sketchup.google.com/3dwarehouse/details?mid=316a27ba42a11a71abdffc6614cbf81a&prevstart=0 (the model is done in skechup, free from Google, if you are wondering about how to open .skp.I need all the help I can get, thank you.
I am running into serious issues with help files being way to far out of date.I am reading things that are clearly wildfire terminology and simply cannot find the Creo ribbon equivalent no matter what I try.Is there an active group within PTC that shows a level of urgency on fixing the Help files?I have the same issue with context sensitive help. Most often, when hovering, the context sensitive help just goes off on a tangent.On the bright side, I found this... a color map for the classic interface when looking for pen table information. This one never even got updated to WF!This is, after all, a critical UI component of the platform. How could this ever pass quality protocols.
Does anyone know of a good website to find 3D models of off the shelf electrical/MIL spec connectors?(ex: PT01A-10-6P(SR))
Hi,I'm working on my Creo Parametric 2.0 startup script. M010, WIN 7 x64.My plan is to launch parametric.exe, which loads parametric.psf. In the PSF, I RUN my BAT file to standardize.Any drawbacks you can think of.For Pro/E I run a BAT, which standardizes, then calls proe.exe, so this is a little different than that, which makes me ask the question.The advantage I found is, this allows users to PIN parametric.exe to the taskbar and retain a Start In directory.BTW, is there an ENV VAR for the start-in directory?Thanks!-Vaughn
Running WF5 M140, I cannot seem to create a visible 3D notation, yet dimensions work fine. I create and place the note (flat to screen or otherwise), it shows up in the model tree as shown and not hidden, but does not appear in the model in any set orientation. I have annotation datums visible, display_annoation set to yes by default, and visible_annotations_scope set to all. The notation doesn't even highlight in the model when I select it in the model tree.Anyone know what I might be missing?
Two questions:1) Can Creo1 read Creo2 files?2) Can Creo1 read Creo2 .stp files?
Ciao a tutti.Sto utilizzando da qualche giorno CREO 2.0 e mi sono accorto di avere grandissime difficoltà nell'inserire piani di riferimento all'interno di un disegno di un assieme. Qualcuno sta avendo problemi con tolleranze geometriche e affini sulla messa in tavola della M010?Grazie,Fabrizio.
I have down loaeded the Creo1 Educational DVD.zip file twicw and when I try to open it, it says the file is corrupt. Can someone help?Thanks,Carol
how to use PRO/COMPOSITE? which is the best about pro/composite and catia V5? thanks!
I was wondering if anyone had a model of a Sony BRC-Z330 camera that they would be willing to share. I looked a few spots like grabcad but couldn't find anything.Thanks in advance.
In Proe 4.0, enter the "Independent geometry", there is a command "Geometry==>Collapse Geometry", but in Creo 1.0, I can't find it, Can anyone kindly help me?
Apparently an original set of Pro/E the magazine hard copies (approx pre 2001) exist only in two unobtainable libraries in the US. This is wrong.Worse I've been told that even the publisher even does not have a set.If you have a copy or two that you are willing to share I would pay for the shipping (both directions)thanksBob
Here’s the cover of one of them……attached.The mags website was proe.com, which isn’t resolving. I can’t really find more than that unfortunately.
Hello, I would like to create a feature directly from the max dim tool of emx. Today it's possible to see the size of the model, and that it's working fine, but I think that will be great if you have a option to create a max size box feature on the model tree. I use this many times for placing dimensions on drawings, but I have to create a box ... Then I creat some lines from the edges of the box... And I use this lines for maximum dimensions, but This take me some precious time. I think that this is not very difficult to creat, and it's a very useful tool. It is possible to do this? Thanks for your time Best regards Pedro Neves
Gentlemen, I would like to present to this audience the new functionality of Creo NC 2.0. Please forward the invitation below to other members of your organization that may benefit of this.Creo 2.0. What's new for NC?Join us for a Webinar on July 18[Description: ">http://img.gotomeeting.com/g2mimages/webinar/themes/business/button_registerNow.gif]<https: www2.gotomeeting.com=" register=" 118298882=">[Description:
I am looking for any information in regards to mini low profile "atc" fuses as well as the fuse holders. I have looked all over the web and can not find any models or dimensional data to apply these fuses. I will be using these for an automotive application.
Hopefully this is a simple one just before a holiday.I have a table that I update everyday to correct the date for the current (today's) date.I use is up to 30X per day, so I save it to reduce the re-entering of the date.Is there a way to save the table with a field or parameter so that when I bring it back in, it will automatically put in today's date?I have done this before with sheet set ups, but not with a specific table.Thanks,Dale
I thought this could be done at one time:I want to force a carriage return in a note text.This note is in relations and it fills in the format table. Therefore I need 1 text string to "wrap" in the table cell.Somehow I thought a double slash did this "//" but that must have been another program.Can this be done in Creo?Example: &title = "THIS IS LINE 1//THIS IS LINE 2"showingTHIS IS LINE 1THIS IS LINE 2
Forgot to mention I'm on WF3, so this button doesn't exist yet... (notthat I can see or find)
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.