Recently active
I thought I was opening a file and must have fat fingered something.This popped up and I can't escape out of it? Why?Also, does anyone know what this is actually doing?Thanks, Dale
what i sthe command to create a 3D Cross-Sectioning in Pro/Engineer 4.0
just curious...anyone else having trouble accessing the cocreate forum (I am referring to the forum not run by PTC)http://www.cocreateusers.org/forum/index.php
Hello, I am currently trying to create a model of a ROV made out of cPVC.I have tried constructing this with pin constraints, however once I get further in the model I start to get numbers that are off by very small amounts.The small errors prevent me from attaching segments of the model across certain segments.Is there a way I can orient a PVC elbow in a certain direction instead of leaving it as a pin constraint?Thanks
Hi, I found the 'color' button on Creo 2.0, bt I don't know where can I find the button to put my own texture.Thanks all !
Does anyone have material files for EPP and plastics that are willing to share? Thanks Mark Brockman
https://www.facebook.com/PTCUniversityJoin us today at 2 PM EDT for a live interview with PTC University instructor and PTC Creo Expert Steve Meyers. Use this great opportunity to learn more about him, his life as an instructor, and ask him for tips and tricks for using the latest versions of PTC Creo.
Gurus,See attached.I need to make a rack and pinion connection. Simple enough except, I need the rack to move in an arc and not in a straight line. The pitch line of the rack is always tangent to the pinion's pitch diameter but, rotates aroung the pinion's pitch diameter.Using WF4Thanks
Can help me someone?How can I set arrows style on default when I open a new draw in the creo 2.0Because I don't want filled arrows.I remember draw_arrow_style in the Wildfire 2.0,but I don't find it in the Creo 2.0Is it replaced? Thank you for you helping
Hi, I'm trying to model the little electrical car I made for school, and I have a big problem. I made a electrical motor (IGES) and I want to put it into Creo Parametric, but when I try that, the motor is way too small comparatively to the other pieces of my model. So, I wanna know if I can enlarge it. If yes, how ?Thank you to help me !
Hi,We are migrating all pro e cad data to Siemens team center, We are facing issues , Any body can help????regards,Siva
Hallo zusammen,da ich neu in der community bin, hoffe ich das ihr mir weiterhelfen könnt.Mein problem ist, dass ich keine 3D Oberfläche erzeugen kann.Jedes mal wenn ich nach Anwahl der trimetrischen Ansicht die Ebene auswählen möchte erscheint folgende Fehlermeldung: '1' auf Grund eines Grafikfehlers gesperrt.Ich habe bereits meine Systemvoraussetzungen abgeglichen und finde kein Manko.Anbei meine Systemdaten:Betriebssystem Microsoft Windows Vista Home EditionCPU Typ 1024MBDirect X 4.09.00.0904 (DirectX 9.0c)Grafikkarte Radeon X1300 SeriesOpen GL Eigenschaften Microsoft Corporation GDI Generic 1.1.0 - GL_Win _swap_hint unterstützt - GL_EXT_bgra unterstützt - GL_EXT_paletted_texture unterstütztIch weis, es ist nicht das non plus ultra.Wäre super wenn Ihr mir helfen könntet.Gruß Tibor
Hi All,I have query, Model was created in Creo 2. How can i open in Creo 1 or Wild fire5.Thanks,Chandra
There is a command at Proe 4.0 : Info ==> audit trail , it can generate the "Audit Trail Report", but at Creo 1.0, I can't find it .
I downloaded an 80/20 CAD Model off of 3d Content Central, however it's too short. I need it to be 17.5"s instead of a measly 12. Is there anyway to extrude or stretch the model to fit my wishes?
Gurus,Can you change the width of SKETCH lines? I would like to see them bolder.(Something like what I sketched)Thank you.-ArtWF4[cid:image001.png@01CE295D.8E2379B0]A r t G a r i b a yDrafter IIIPacific Scientific EMCHollister, CAPhone: (831) 637-3731 Ext 523....This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.
Hallo, ich habe mir dieses Programm heruntergeladen und bin überzeugt davon, dass es wirklich gut ist. Seit gestern sitze ich nun Jedoch bekomme und mein ""Problem"" nicht auf die Reihe und die Zeit hängt mir im Nacken. Ganz sicher ist es für Fortgeschrittene und mit mehr Zeit zum Ausprobieren eine Kleinigkeit. Aber irgendwie ""stehe ich auf der Leitung"" - totale Blockade. Also: Ich muss einen elliptischen Kegelstumpf In mehreren Größen erstellen. Davon benötige ich dann die Mantelabwicklung als Zeichnung. Diese brauche ich für die Erstellung von Schnittmustern für diverse Taschenmodelle.Einen elliptischen Zylinder habe ich ja inzwischen hinbekommen. Ob die Maße Jedoch stimmen - keine Ahnung.Aber wie geht das nun mit dem Kegelstumpf und der Abwicklung?Ich bin echt verzweifelt. Kann mir bitte jemand eine genaue Anleitung dafür geben? Ich bin dafür sehr dankbar.Viele GrüßeS.tiTO - Anja
Does anyone know when Pro/E will support the latest Dimensioning andTolerancing standard ASME Y14.5-2009? I searched the knowledge base andthe ptc.com and found no reference to the new standard. Thanks, Mike Foster ATK Space
Im new to 3d drawings, I have a solidworks IGS file which I can open in wildfire 4 but, when I try to then change to a DWG it wont let me. Is this because of dimensions not on the IGS file?I appreciate any help on this matter
A lot of people wish this was possible, however nobody that replied has beenable to make it work. It seems that I should be able to get thisinformation somehow. Thanks to those who responded,Rob Devaux
Creo 2, M040I like the nice command search tool, it's handy. Today I went searching for 'mapkey' and find that it's under 'Commands Not in the Ribbon'.My question, if they aren't in the ribbon, where are they? Is the only way to access the 'mapkey' command through the search tool?--
Looking to try to create a wavy washer and a washer with radial teeth cut into it? How would I go about doing this? Thanks. Jon.
Hi guys, I need a 3d model of a large golf ball, which is around 500mm diameter. It is beyond my capabilities so I was wondering if any of you are good enough to do it? If you could make it flexible enough to change the diameter and the dimples accordingly that would be even better. Thanks Please email to leecasey at leecasey . com
Edrawing folks:I want to put an Edrawing .exe file on the web. Anyone know how to do it so it opens the .exe and not request to download?WayneF
Hi there,Can anyone tell me whether Creo Elements/Pro can display hole and shaft tolerances as Nominal +/- tol (H7) as in item 1 below, rather than Nominal H7 (+/- tol), item 2 below??Many thanks.Adam
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.