Recently active
設計ソフトで質問です。 大学を卒業から、Pro/ENGINEERで設計した図面を修正したい。なので、Pro/ENGINEER以外のソフトでPro/ENGINEERで設計した図面を開くソフトはありますか?何故ならば・・・Pro/ENGINEERのソフトが高いので・・・できれば、一般人でも購入できるもので・・・
I am having problems installing Creo to run on my computer could it be because I am still running Vista
Hey all. I recently switched jobs and I have gone from using Inventor & AutoCAD to Creo Elements/Pro. The last time I used Pro/E was years ago and it was release 2001i...been a while I know.Anyways, I still have my personal version of Pro/E 2001i that I used while I was doing private contract work and have gotten set in my ways of how I like the program setup. Creo Elements/Pro is very similar except that I don't see where I can turn Intent Manager off. Personally (at least at this point in time) I still prefer the older menu style of sketching. I know my way around it.Is there any way to turn off Intent Manager in Creo Elements/Pro 5.0?Any help would be much appreciated.
設計ソフトで質問です。 大学を卒業から、Pro/ENGINEERで設計した図面を修正したい。なので、Pro/ENGINEER以外のソフトでPro/ENGINEERで設計した図面を開くソフトはありますか?できれば、一般人でも購入できるもので・・・
WF4, M220I need to create an alternate view that is essentially like the default isometric view, but starting with a different front view, if that makes sense. I remember a long time ago seeing angles to rotate from a front view to get to default, can anyone tell me how to do that?Thanks,--
Hello everybody,I wonder if it is possible to compare two quite similar 3D models (initial model and modified model) and to highlight the surfaces of the modified one in this way :- added volume in color 1 (example : Blue)- deleted volume in color 2- unchanged volume in color 3Many thanks for your help.
Going Live with Creo 2.0 in a couple days....are you able to create "new flyout" (WF5 term) in the quick access tool bar? I cannot seem to find it, so I am assuming that it no longer exists.
Hello, I'm looking for a way to export NC information from Creo 2 / EFX. The DSTV file format generated by default does not seem to comply with the DSTV-NC format. Is it planned to do so in a future version ? Would you suggest another tool/plugin to do the job ? Thanks a lot for a quick answer Thibault
The following feature would be very helpful:combine config-options with Mapkeys Layer Operation set layer status (hide / show / isolate)set layer active / inactive toggle layer status between show <--> hide set drawing options
Hey all,Does anyone have a link or file that is a change log for Creo 1.0 M50? I looked on ptc.com, here, and the internet...but nothing popped up.I know I am behind the times, but want to see if this build fixes any issues that we have. Thanks a lot!Peter
Hello! Anybody know what mean the parameter BOLT_TYPE in bolt_nut_mcat.ptd file? And how to use this?
Dear FolksDid any one aware of PDMS?is't possible to work in creo = PDMS?thanks in advanceRegardsViswanathan.K
Hi folks,while we sketch any circle or arc,by defalut it wil show centre line?But in wf-5.0 full circle only showing centre line.what we need to do get centre lines for arcs also autometically?AraviK
i am attaching the video link can anyone tell me how to attach file according to which nose cone is made in this videohttp://www.youtube.com/watch?v=V8b-VOhxG4w
How to shift entire column text details into other column?Is there any facility realted to this?
Where can I get renders/models of common parts like screws, bolts, nuts, etc? As well as electrical parts like terminal blocks for example?
I have created 3d model in Auto desk 123d Catch, I imported that model in Pro-e which was in Stl format. I am unable to process it i.e I can not perform operations like Merge, Extrude,etc.. I have uploaded the model in Stl formet, please help me
how to get cloud point data of imported stl model in pro e
Hi everyone,Do you know what PTC tool is available to read old .des files made with Pro/Desktop Express 2001 ?Thanks
Okay...I know this is the CAD forum...not the rant section....but I cannot hold it back any longer. The new draft analysis is truly horrible. Slow, cumbersome, un-imformative and a PAIN to use.PTC,I know I can "save" an analysis....but I simply don't want it required of me to do that to have functionality that used to exist and worked fine previously.end rant.
Hi, I'm trying to put the bend allowances of our sheet metals in a bend table Pro/E, but I'm confused about the help files. It's clear to me that for an angle of 90 degrees, the standard conversion formula would be: L=2*(T+R)-A (where A = allowance) But for angles below 90 degrees, my guess would be that the conversion formula would be: L=2*(T+R)*tan(ANG/2)-A Am I missing the point of the conversion formula, or is my formula right and is the help incomplete?? See http://downloads.neoposttechnologies.nl/neopost5/bend_allowance.jpg Am I using the right dimensions for x and y here?? Thank you for any clues! Kind regards, Jaap Kramer
How are people creating gears (true gears) in Creo?Preferably a free way, and not a purchased package.thanks!
Hi I have been using creo 2.0 for the last 6 months and i have been facing this problem regularly. As shown in the image i am not able to move the annotation 18 horizontally. Any help in this regard will be appreciated
So I cannot get my colored transparencies to show up correctly on my computer.I'm running Creo 2.0 M090 with the newest AMD FirePro driver set (13.152.4) as of 01/20/14. The card is a FirePro V7900.I recently stumbled upon OIT and really like the potential performance upgrade I could get. But all my colored transparencies show up as clear. Meaning I have a really crappy view and it's hard to distinguish different transparent surfaces.I saw SPR 2140668 and what appeared to be a fix back in M010 but apparently that doesn't apply now?Anyone else having this problem or know how I could fix it?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.