Recently active
We just migrated from WF4 to Creo2. in WF4, once we completed a dwg we alwaysused the show/erase dialog as a fast way to check if the dwg was fully dimensioned. Please tell me there is a fast way to do this in Creo...?Does anyone know how to quickly show all dimensions (or "annotations") regardless if they were "errased", or "deleted")?Thanks, Lawrence
I am printing out a model (parts on a fixture) and I have annoations that show up. This only happens on a few prints. Any thoughts on what may be causing this and what I need to change to prevent it.See below:Thanks, Dale
Hello everybody,In our company we are new to using Creo parametric. Comming from Inventor it is a pretty big adjustement.A simple thing which I don't seem to figure out is how to convert a project line to a construction line. A normal line I can convert with holding right mouse button and selecting it. But for a projected line it isn't there.ThanksBerry
My maintenance invoice went up 3% this year. Anyone else experience this?That Makerbot sure is looking like a bargain compared to PTC maintenance!
Hallo zusammen,bisher ist mir hier im Forum immer gut geholfen worden.Daher möchte ich die Zeichnungsvorlagen nach EN ISO 7200einstellen.Mit freundlichem GrußWerner
Dear all,I want to know about skeleton modelling.what is the advantages of it?for non symmetric model can I use skeleton modelling?
I have searched for some answers but I am still confused. What is the different between all of these and are they all needed?PROE_WORK_DIRPDM_LDB_PATHPTC_WF_ROOTPROE_START_DIR Steve G
What is the macro language for Creo?
Anyone have any data comparing performance or stability of Creo 2 on 32-bit vs 64-bit? We have discovered a big difference in stability on Wildfire 4.0 but I need data on Creo 2. I have searched for similar discussions here and have been unable to locate this specific discussion.
I am not able to display hidden line in creo paramatric 2.0
Qualitätsagent, der in dieser Ausgabe erforderlich ist, nicht ausgeführt werden kann. Fehler 0x06000012
Can anyone explain what this parameter does? i cannot find anything about this, not google nor this community nor the Creo help nor any of the PTC cases... typical (i can imagine what it does, but i would like some official info or experiences, because i cannot see any reaction after editing its value).Greetings, Arno
I wanted to show someone a Jpeg. of my model but i want to change that boring white or grey background. Is that possible to have my own background texture? If yes, how?
Anyone know why sketcher is displaying so many decimals on dimensions that I make strong? My company recently switched to Creo 2 and I never used to have this problem. I didn't define these values with this many decimals...Creo did this automatically for me.
Hallo zusammen,Wenn ich die Lisp-Datei für Gewinde "ar_gewinde.lsp" mit "Datei -> öffnen" mit der Dateiumstellung auf "lsp" öffnebefindet diese sich im Werkzeugkasten. Ich kann die Datei anwählen und bekomme ein Eingabemenü angezeigt.Lade ich mit der gleichen Vorgehensweise die Datei zur Federgestaltung "feder.lsp" oder auch "federn.lsp" in gleicherWeise ein, dann erscheinen diese NICHT im Werkzeugkasten.Gebe ich folgendes "ADD_TOOLBOX_BUTTON :ACTION (LOAD "D:/Creo-CAD/LISP/Federn/feder.lsp") :LABEL "Feder" COMPLETE" in der Eingabezeile ein, dann steht "Feder" zwar in der Werkzeugkiste aber anwenden kann ich das Programm trotzdem nicht.Beide Programme a) fürs Gewinde und b) für Feder stammen von der Seite http://osd.cad.de/ .Wo liegt der Unterschied des Verhaltens bzw. was beachte ich nicht.Mit GrußWerner
So, to ask a question that I'm likely to kick myself for shortly, if I apply a transform to a component via component operations, how do I get rid of that transform (outside of edit Definition/Modify)? I thought there was a remove transform or some such in the menus, but I simply don't see it/can't find it if it's there.Thanks, all!Brian KriegerPeterbilt Motors
Do any of you use "agile engineering collaboration"?If so, could I ask you questions offline?Thanks!-ArtWildfire 4.0This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.
Hallo zusammen,Ich bin derzeit Praktikant in einem mittelständschen Maschinenbauunternehmen und beschäftige mich seit etwa 3 Tagen mit der aktuellen Trial-Edition von Creo 2.0 Parametric.Ich "konstruiere" einen Motor und möchte nun eine Skelettmodell erstellen. Allerdings wenn ich eine neue Baugruppe erstelle und dann ein Skelettmodell erzeugen möchte ist die Funktion als einziges gesperrt. Wiso und gibt es eine Möglichkeit da ran zu kommen? Heute sind leider die wichtigsten Leute in der Konstruktion nicht da, deshalb meine Anfrage hier. Ich vermute ja das da mal wieder ihrgendwelcher Lizensmist vorliegt, aber wiso ist bei einer 30 Tage Testversion nicht 100% aller Funktionen verfügbar?Vielen Dank schonmal!
Hallo Zusammen, ich such mir schon seit 2 Stunden den Wolf wie ich aus einem 3d Modell eine Fläche als dxf ableiten kannGeht das überhaupt mit CREO Enterprise?Danke schon mal für einen Zeitspartip Gruß Antje
Hallo zusammen,ich habe eine IGS-Datei geöffnet, die mehrere Flächen als "Skin_Grup"ausweist.Diese Flächen sind auch nur als Gesamtheit zu bearbeiten, was ich aber nicht möchte.Wie kann ich die Gruppe in Einzelelemente auflösen?Mit GrußWerner
Hi allIs there a limited time download of pro/Desktop that parents could use to assist their children who use this software at school ?ThanksDave
Can someone tell me is there an option that allows more than one people to work in a common workspace in Windchill - Creo?regards,Amarkarthi
Hi EveryoneMy son has been working on his GCSE project for a while and now it is reporting as corrupt so he cannot update and his school have told him he must start again! Can anyone suggest how this file might be repaired or another way to copy the data out to a new file to save him many many hours trying to complete his GCSE projectThanks in advance for any help that this forum may be able to offerDave(The Dad of a very stressed lad)
What are people using out there for cost effective 3D scanners that you can take data and build models off of?-- Carl LeverYorkville SoundTEL: 905.837.8550 ext. 222FAX: 905.837.8746clever@yorkville.com
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.