Recently active
I've just started revising older designs on Creo 2 running in a Fusion Windoe with Win 7. Everything seems to work well, but I'm getting stymied by either my ignorance of Creo 2 vs older proE verions, or there is some sort of key mapping problem that keeps me from doing pretty basic things like measuring dimensions. Following the tutorials for using the measurement tools, it seems that ctl and alt keys are used with mouse clicks to get the basics for any measurement. All I can get is the base reference on first click, then nothing.Any suggestions?
OK,So, while playign around with Creo 2 (actaully, frustratedly trying to find something else taht use dto be fairly easin in WF5) I see I can 'hide command lables' in the ribbon. Cool! But, uhm, how do you unhide them? help tells me a few times how to hide them, and that thy can be hidden.. Once hidden, the 'hide' option on teh RMB menu is now greyed out..Oh, I'm a new-ish user (1.5 yearsw) with many of the gripes the others have.. My list is ever growing!
I am trying to do an static analysis on a car frame. Here I took a screen shot of a test run I tried in mechanica. It consists of two tubes meeting at about 70 degrees. You can see the red blob of polynomials about 3/4 of the one up one of the tubes. I recieve an error:"The model is insufficiently constrained for the analysis. Please review the element connections, properties, and constraints in highlighted entities. If this is a modal analysis, then you may be able to obtain a solution by requesting additional modes."If anyone could tell me where to go from here that would be great. Thanks.
Hola!He tenido un problema al intalar el creo 2.0, cada vez que completo la instalación y lo abro para comenzar a trabajar aparece una página de servicion de creo pero al tratar de abrir el espacio de trabajo con lo planos éste no aparece y esta página no se cierra, alguien me podría ayudar a saber a qué se debe esto y cómo lo puedo solucionar?
when ever i try to open pts file from my desktop to pro e it says no points found in pts file. while i have tried several times, kindly guide me where i'm doing wrong, the following are the points. 23.32023.31123.3223.29323.26423.24523.22623.18723.15823.11923.081023.0411231222.931322.891422.831522.781622.711722.651822.581922.52022.442122.362222.272322.182422.082521.992621.92721.82821.692921.63021.483121.363221.253321.1334213520.873620.733720.63820.463920.324020.164120.064219.884319.734419.594519.454619.34719.164819.014918.875018.735118.585218.455318.325418.25518.115618.095718.085818.075918.056018.046118.036218.026318.016418.01651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899181001810118102181031810418105181061810718108181091811018111181121811318114181151811618117181181811918120181211812218123181241812518126181271812818129181301813118132181331813418135181361813718138181391814018141181421814318144181
Anybody out there running WF2 on Win7?
what is the difference b/w check out & check in in windchill?
When exporting a Iges with sketches, all the entities in one sketch are joined in one single curve. Is there any way of exporting the sketch entities in independent curves?
Can any body suggest me which low budget laptop will be good for creo 2 parametric? I think core i 3with 4 gb ram i can afford? whether it would be ok?
How to increase the gap between text and underline?
it really made me headacke. creo2.0 can't not set a key to off/on all layers, but off/on one specified layer is OK. anybody could help me? I appreciate U very Much!!!
Dear FolksI have opened empty formatOn the annotate tab, Mannage text stylesCreated some new styles of textAnd i restarted the pro_eMay i know why the created text styles not available? in mannage styles(Default,2D_hyperlink,3D_hyperlink,none) only available?May i know how to save new text styles? and in which location all the text will save?Thanks in advanceRegardsViswanathan.K
How can one disable the short red line that spins around during model rotation? It's quite annoying.Thanks!
Hello everyone,I'm a Creo 2 user and I'm having a problem with the representation of sections made with 2 planes. The attached image shows the exact problem I have.The section is projected perpendicularly to the parent view and represents the component cutted. It should represent instead the section always perpendicular to the section planes.Do you know how to solve this error?Thank you in advance.
Hi everyone,I was just preparing 6 meter inverse T beam with combined load in beam element , while running modal analysis . I was getting a following error for recovery point. Does anyone has idea how to define recovery point ?Attached Jpeg file for ref.cheers,Dhiraj
I want to keep two holes at a time.Is it possible in pro-e?
Is it possible to create round snap lines?It would be nice to have piece marks and balloons in a circle around an object.thanks,JG
Good Morning All,Is it possible to paginate a hole table? It does not seem to work like a report table.
Does anyone know how to open a Navisworks file in Creo View? a .nwd file extension!
Hallo zusammen.Ich habe eine Frage.Ich habe ein Werkstück versehentlich in der Grundeinstellung Meter entworfen.Wie kann ich dieses Teil ändern auf mm.Ich kann natürlich in den Einstellungen im Menue von Meter auf mm ändern, aber das ändert mir das Werkstück nicht mit.Über die .stl- Dateien bekomme ich im prototyping jetzt immer ein Hochhaus statt meines 50 mm Teiles.Ich wäre für schelle Hilfe dankbar.
How to create a profile like attached image in pro/e sheetemetal
Any help? Click it.
We are in the process of migrating our Pro-Engineer files from a
I have some work where essentially the end product is "pretty pictures" of concept ideas that I believe would be easier to complete outside of our normalWindchill 10.1 M10 environment (with Creo2 M030). Back in the Wildfire days, I remember being able to create a new Pro/E start up command that didn't link to Windchill by running ptcsetup. I would think there would be a way to do so in Creo? Anyone have the proceedure? I am notnearly as fluent in the intricacies of Creo set as I was with Wildfire, so steps would begreat.I do realize that I can go into Server Manager and work "offline", however that still defaults into workspaces. I would prefer to just work unfettered by Windchill; filing to a specific directory on my hard drive, changing and renaming things as I see fit...thanks in advance...
We're using Creo and 3D Connexion space mice here and as a result are very focussed on the screen when modelling. The only time we seem to divert back to the keyboard is to enter numeric values to change dims and so on.What's the chance of PTC incorporating an on screen numeric keypad, that you can toggle on and off, with +,-,/,* and return keys to allow the user to maintain focus on the screen? There are a number of apps in the wild that try to do this, but none seem to work very well.All input in terms of expanding the idea, or somebody being able to point me at a reliable solution that already exists, very much appreciated!And have a great Christmas guys!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.