Recently active
Hey guys,Quick question, is there a way within making a resume prompt to have a "yes" /"no" statement, if you click yes it keeps running the map key, if you click no it will stop the mapkeyThanks,Brock
In experimenting with some simple BLENDS, I often find unwanted twists in the finished Blend between sections. This is easy to fix by dragging the start point on the section. When I create Blends from existing sketch sections, this works fine.However, when I create BLENDS and then create sections inside the blend, there is no sign of the start point. Without the start point, I cannot fix the unwanted twists.Does anyone else experience this? Should I just recommend to my class (high school) that they create Blends from existing sketches? Or is there a way to get the start point to appear on Blends with internally defined sketch sections?Thanks for help on this.-Brett
Does anyone have a list of all of the alt key shortcuts?
Question about the latest version 3B2Have you been to solve this problem with the Arabic language as when additions or movements formation does not appear in the text and disappear.Have you been to solve this problem Sorry I'm not good at English.I did not know where to put this review, therefore if you please solve this problem, I want to experience the new version. Please Notify me via e-mail so thank you very much. I am from users of the program is the first version: DOSI have the experience of the previous version 11 for a limited period, but the problem was resolved and did not exist.
Does anyone know if Chrome will be supported as a embedded browser?
Can anyone recommend some best practices as well links to proper skeleton setup?We are trying to establish some system and subsystem skeletons, where the system skeleton will be used as locator skeleton and subsystem skeletons as interface skeleton. Is this a good practice or could you recommend otherwise?We want to set up all the subsystems by way of subsystem skeletons; these skeleton, I picture, will contain all the interfaces to other subsystems.The master skeleton then houses all the subsystem skeletons; by way of global coordinate.
Anyone willing to share a Celcon M90, (acetal copolymer)material proerties? Running Creo2.Thought I would ask before starting the long task of creating it myself.Thanks....
To all,Does anyone know how to supress thisdialogue in Creo?Buddy Hudson
Hi all - I found a reason to leave Creo2 M070 and want to update. Should I go M090 or M100? I run without PDM - but I don't run with scissors or a lollypop in my mouth. Thanks
Video Link : 4977
Hi All How do I import/insert my own bend table.? Is there a certain way the formula has to be written? Does it matter if it is imperial/metric? Thanx
I ran some random vibration analysis and I'm wondering despite checking the box I don't have any RMS resutls in the log or results. Shouldn't creo calculate it for me?
I have a customer asking if Creo can be used to optimize drill bit geometry. What combination of angles for the different edges will give the best performace for a certain material. Attached is an image of his model.
hi. I want to know in PTC CREO 2.0 programme interface if there are objects to work with NURBS method in programming Languages like VB or anyone else. How easy it is how easy to use how workable.not in User interfaces but in programme interface. i hope to be clear.. and explain much better to give me some knowledge. thank you fo your interesting!
First time poster, long time proe user...Finally updated all my map keys in creo 2, well, so I thought but noticed that any map key starting with a "p" or "o" don''t work. They work if you manually run the map key in the Map Key dialogue but not out of it?... Anyone notice this or have a reason for it/solution or should I just relabel them?
Is it possible to format rpt.index so that the sl no apears line i,ii,iii,iv etc.?
Wayne-O, I am just checking something out here. I downloaded the latest copy of MSOutlook and I was noticing that the email arrangements for the PTC User'sGroup is a bit different. Sorry for the inconvenience. Michael P. Locascio
Thanks for the many, many replies with lots of good info.The problem was the almost unanimous choice of IE rolling up to a higherversion. After getting with our local IT guy, we subsequently found out that "CampusIT" had, without notice, rolled out IE 10&11. We rolled IE back to its previous version and life is good. Thanks everyone! I now have specific, detailed instructions on how to cleanout my java cache, and other assorted goodies. Anthony R. Benitez Senior Mechanical Designer - Supervisor Applied Research Laboratories - The University of Texas at Austin
hello EverybodyI have a model where I want to assign a mass , but this mass is outside the model.First I have created a point where my mass will be located but I don't know what is the best solution to link the point and the modelUse a rigid link or use a weighted link ????Many thank for your helpOlivier
Hallo, Ich bin fast neu in Pro-E. Ich möchte eine Montage simulieren, aber diese montage ist auf viele teilen mit getrennte Koordinaten system zusammen positioniert. so es gibt keine beziehung zwischen diese teilen und wenn ich eine teile dreht, die nächste teile folgt nicht. Wie kann ich diese Montage umwandeln, damit ich alle teilen verbinden mit neu Zwänge wie z.b etwas Joints für bewegung. Kann ich diese Montage umwandeln oder muss ich eine neu Montage wieder machen? Grüß,Vish.
Hallo,Ich wollte fragen, ob das Erzeugen von einer Gewindebohrung bei der Studentenversion von Creo Parametric 2.0 möglich ist.freue mich auf Ihre antworten.Gruß Hervé
Anyone know if there is a problem or compatibility issue with microsoft mouse and keyboard. My f keys do not seem to work in creo parametric.Any help will be appreciated.Larry
I am not sure where this message will go. Hopefully I will get some goodfeedback on this question. Does anyone know what happened to the email address system and/or why ithappened? It used to be that a user's email address would appear with all ofthe messages that I used to receive. Now when I receive a message fromsomeone in the user's group it just lists the email address as "support..."That's kind of disturbing because I tend to update some of the user's emailaddresses on occasion and that universal email address that they use can,and will, screw up any correct email address that I previously had for mycontacts. Michael P. Locascio
Hi all!is there a way to sepparate drw publishing from asm/prt? Our cadworker gets overwhelmed with cad doc publishing, so thinking of different ways to make use of multiple cadworkers.Thank you,D
Hi,I met one of the more puzzling questions,now I establish axis of series modeling. Looking at the picture below!IF you establish same holes and we can control these parameters from hole,But we can't get parameters from screw hole and control the screw szie ,for example, M6X1 ,M8X1.25,M10X1.5 ,and so on! can I establish the variable screw size of series axis in afx/equipment module?thanks!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.