Recently active
how can i change the background to white color.. the black color is annoying.. i tried in FILE->OPTIONS->CUSTOM. but it is not working
I recently installed the creo package and whenever i try to open any of the applications, i get the message, "creo 2.0 from ptc has stopped working". Then it forces me to close the program. I've uninstalled everything and reinstalled the entire package with no luck. Can anyone help me?
I am using CREO/Elements 5.0 and I would like to save a pro/ENGINEER part or assembly file in a format that will allow me to send it to suppliers (who are using PTC Creo View Express 3.0) who will be able to see the solid model as well as the annotations and other PMI. I have tried saving my part file in the PVZ format, but only one view is visible in Creo View Express. The reason why I would like to have multiple views is that I would like to use multiple Combination Views with different dimensions and GD&T to avoid having a single view with too much PMI. According to the Creo View comparison chart document (http://www.ptc.com/WCMS/files/129373/en/6813_Creo_View_Chart4_TS_EN.pdf), this functionality should be available (“Display Combination or View States from Creo Parametric or Capture States from CATIA V5”).
Hello,I´m new with "Sheets" ("blech" in german). I have been trying two whole days to make a sheet with cuts that can be rolled into an octagon, like origami. I have tried with Flach. Also using a lot the tools Profil Planar and Abwickeln (my Creo is in german), but at last I can´t permorm it. Have someone an idea how could I do what the picture shows?It would be nice that it can be folded and unfolded. Thanks a lot.
I am looking to auto add space before the text in a table. This table is used in a sheet format. Currently i am putting in 5 spaces before I type any text which isn't the easiest to get right every time.Image attached showing the 5 spaces in the text input box.
I want to set black background color in sketcher,but I set gray background color in 3DI can't split their color when I set background color from File-->option-->system color -->background color,hey change togetherHow can I split their color ?3D background color is gray (like picture A)A2D Sketch background color is black (like picture B)BHow can I make them show different color?Thank you
This proves beyond a shadow of doubt that PTC are deliberately messing with me.So... I'm looking for an endpoint condition that's not tangent, and not-not tangent. Something like the way it takes 3 attempts to get my micro USB in the right way when there's only two sides. It must be a quantum-something.
Hello,I´m new with "Sheets". I have been trying two whole days to make a sheet with cuts that can be rolled into an octagonal. Like origami I have tried with Flach. Also using a lot the tools Profil Planar and Abwickeln (my Creo is in german), but at last I can´t permorm it. Have someone an idea how could I do what
Hi all, is it possible to define the curve shape shown in the attached image by equation only? I know this can be done using surfaces & trapar, then just coping the resultant edge, but i was just trying to simplify my approach. (its the star shape i am after).RegardsJohn
HiPls find th eimageHow to calculate the depth of hole thread if it is bind hole ?Details ;M10x1.5, 40 length , thread length 26 mmOver all assemble length 40 mm
Okay, haven't had the need for a very long time to edit a symbol from our symbol library and don't remember ever doing it in CREO 2. I tried to search help, but cannot come up with the how and to save it back. Is there something simple that I am missing?Thank you,Brian ToussaintSystems AdministratorHoshizaki America, Inc."A Superior Degree Of Reliability"618 Hwy. 74 S., Peachtree City, GA 30269Phone: (770) 487-2331 ext. 1216Fax: (770) 487-3359www.hoshizaki.com
I'm trying to figure out how to view just all my workspaces and all my checked out work in 10.2.I can't figure this out.Workspaces==========In 9.1 all my Workspaces can be viewed in a single table by picking Home, and Workspaces.[cid:image001.png@01CFC134.EC9B61E0]In 10.2 how do you see this list without seeing all the other crap in your home pageSimilar question on Checked out work.
CREO2 M120. remodeling a geographical nightmare that someone created. Pic 1 is what I need to do, pic 2 and 3 is removing it with Flex, Pic 4 is putting it back on with normal radius tool.And ideas? I thought there was a way in the past to stop radius from being created on tangent chains? maybe that would do it?There is also a .5 radius on the lower side, Pic 5, this might be key, too. What I dont have is a good picture of what they look like blended together, although it is amazingly close to Pic 1. (it doesnt wrap around like you would think; it just ends).Pic 5 the radius isn't supposed to continue to the right. (pic 5 is putting the .5 radius on first.)
Hello!I have some experience with other Cad (ViaCad), but i am a beginner with PTC Creo Elements. Here is my first model:If I try to shell it with a hole in the marked position (coloured ring in the picture), I get the message:Bei Erstellung der Schale wurde(n) 8 Fläche(n) gelöscht. Es wurde ein zusätzliches Flächenteil erstellt. Sie können es u. U. zum manuellen Erstellen eines Schalenteils verwenden, oder Sie ermitteln die Problembereiche im Originalteil.So I have no hole and i am not able to make one.In ViaCad I make one click an it is shelled.For me, it seems to be a very simple modell for shelling.What goes wrong?Pleas look at my model in the atachment.Thanks for helpStefan
Why does creo create a new file with the same name when I save the model. Is there any configuration option so that the file gets updated and not created again.??Thank you.Shashi.
Is there a way I can see if an object is checked out or created in someone else's WORKSPACE without admin privilege?I am getting the FILENAME conflict and the object does not exist in any of my WORKSPACEs or in Windchill cabinet. I know the admin can search the object and pin point who has the same object name in their WORKSPACE.Thank you in advance 🙂Calvin
why does CATIA win over Creo (Pro/Engineer)? 1. Is it the functionality?2. The marketing?3. Or both of the above?If so how can it be countered?
Why PTC copy Inventor e SW?Creo is a bad copy of "Inventor" and SW, for every command you need to open a drawer, a stressful thing.Why PTC does not track its own way.If it continues so will die.Do you remember CADDS5. I await your opinions.
Thanks Rob. I agree 100%. Show dims save time but it’s not the only way. I thought the world was against me when I suggested one option to create an associated dim, albeit without using a show dim J Paul Paul Mailloux ▪ Program Manager NyproMold, Inc. 144 Pleasant St, Clinton, MA 01510 ▪ www.nypromold.com
Hey, I have a copy of this book written by Steven G. Smith from Cadquest.com. You can go there for a detailed description. Please hit me up off list if you are interested... just cost of shipping from zip 48316...PS: I also have his Windchill PDMLink 9.1 CAD User's Guide available too...
Is there a way to change the columns displayed in the search results in Creo?Right now it displays Name. I'd rather see File Name.[cid:image001.png@01CFBD20.711DB850]David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550
In 9.1 you could set this preference to show the filename as search criteria on the simple search.[cid:image001.png@01CFBC55.93D1B570]Looked like this:[cid:image002.png@01CFBC55.93D1B570]I don't see anything like this in 10.2. There is no preference.[cid:image003.png@01CFBC55.93D1B570]I don't want to get results from the FAST indexer. I just want the matching filename.David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550
We have just upgraded from WF4.0 to Cre2.0 m090.Due to this many mapkeys are not working and hence I was wondering is there is way to find out the path followed by existing mapkeys in WF4.0If there is a way to find out the steps then we can manually re-create them in Creo2.0I am asking this because there can be certain steps that could be missed if we try without knowing the steps and only the end result occuring in WF4.0Thank you.
How can I find the name of a given display table? I need to have the value of a specific row in a given display table with lisp, but I don't know the name of the given display table.Thanks in advanceGreetings
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.