Recently active
I went looking today for the GCRI (Granite Cross Release interoperability) plugin that allows older fersions to open files from newer (2 or 3 releases back, I think), and I couldn't find it. A google search for "GCRI" or "Granite Cross Release interoperability" came up empty as did a search here at PTC.com. I found a link in an old email to the page for it (http://www.ptc.com/products/granite/gcri/free-download.htm) and it's no lionger there. Did PTC discontinue this or did the page get moved during their recent web site redo?
Dear PTC.If you kill PTCUser.org without providing an adequate alternative (read "email notification for ALL posts") then you deserve what you will get - more bitter cynical users that question your every move and refuse to trust the most transparent motives.Sound familiar? It's the very thing you've been trying to patch over ever since the heyday of the 80's and 90's when you built a solid reputation for screwing your own customers. Good times...Never mind you're giving Solidworks another example of why they are the easier company to work with - customer focus is just another fad, like pet rocks and MySpace. The really cool companies are establishing a single source of information. Align your strategies, control the message, feed the pipeline... and pretend you don't see that simple solution over in the corner.Seriously - where else are you going to find knowledgeable global experts willing to share their in-depth understanding of your products... FOR FREE!! No company can afford to o
The shocking news from day one of PTC Live is that PTC want's to "absorb" the mail exploder into their on-line communities forum.http://communities.ptc.com you'll see the announcement of this at the top of the page.I went up to Ron and Dan durning the break and said what are you doing to my mail exploder. The answer was there was pressure to only have one source of communication instead of some stuff on the forum and some via the mail exploder. They are having discussions next week on how to transfer the data from ptcuser to the ptc site.I asked if I was still going to get emails and the answer was no.I'm sorry but this is killing the goose that laid the golden egg.Make no mistake, if you don't raise your voice on this issue the mail exploder will disappear.Dave Haigh
I'm trying to replicate a mapkey that i created in creo2 for creo3, but I'm not having any luck.Below is the mapkey that works in creo2mapkey u @MAPKEY_NAMESMART_MARK;@MAPKEY_LABELSMART_MARK;\mapkey(continued) ~ Command `ProCmdDwgCreateNote` ;#MAKE NOTE;#NO ARROW;@PAUSE_FOR_SCREEN_PICK;\mapkey(continued) @PAUSE_FOR_SCREEN_PICK;&PTC_COMMON_NAME:ATT;;#DONE/RETURN;Just some more infomation: when i try to create that same mapkey in creo3 is stops when "&ptc_common_name" SHOULD be automaticly typed in. So pretty much the mapkey works up until the text is supposed to be filled in automaticly. Also, im not sure if this is relevant but i get an error that reads: "Mapkey error: Invalid trail file line : No palette found for command 'ProCmdDwgCreateNote' in context 'context_main_dlg_w3'"thankyou
Anyone ever send in one of these traceback errors to tech support?We have been on CREO 2 (m080) for a few months and have had a few of these in that time.This one happened while adding a radius.[cid:image001.png@01CFD999.7DC9BAF0]Delbert Demaree
I want to create some custom buttons for my Creo, can someone please tell me how I can do this?I am using Creo 2.0Thanks,
I recently installed Creo 2.0 Student Edition for my laptop, but Creo parametric says it is the trial version. Please help!
Thanks to all that replied.Summary:There are several methods from the replies.* Silent Install - At the PTC conference this method was the popular option* Install SCCM on the Client machines* In-house script* Inneo -
I just started again working with Creo 2.0 a couple months ago. I used Pro_E back when it was DOS based. I have used Solidworks and Inventor also. I am very disapointed that Creo has not changed that much since I used Pro_E . Seems like they keep adding things and not fixing the problems that need to be addressed. I was really blown away with the fact that Creo still does not count all the holes in a detail. Very sad.I was really looking forward to using it again it was the best program out there when i used it long ago. it seems it is very far behind the others now.
hi,We now can use to design models by the screws/nuts/washers/pins。Usually,we must establish standard parts in afx, for example,bearings/bearings with housings,keys,and so on.there is a probelm about the naming scheme of standard parts.for example,I create a standard part of bearings with housings,ucp_pillow_blocks.but this part have a series of type ,for example, ucp201,ucp202,ucp203,ucp204,and so on.I now need the naming scheme of standard part about ucp_pillow_blocks in afx(Just as the naming scheme of screws/nuts/washers/pins in afx) ,so these naming( screws/nuts/washers/pins) are different from the parts of afx/equipment (That is :PROJECT_SHORT#-#ELEMENT_NUMBER)I need help and tell me this naming scheme of standard part.THANKS!
How to switch on quilt edge display in shaded view status?I used to do that in WF4, the open quilt edges were highlighted in yellow color....(it was in View-> model display tab) but the similar option if available in creo, pls discuss how...?that will be use ful while fixing complex quilt open edges
Dear Experts,We are in the process of upgrading from WF5.0 to Creo 2.0, and looking for any feedback specifically to Regression issues. Did anyone have issues with models not regenerating going from WF5.0 to Creo 2.0.Any input is appreciated and thanks in advance,Anil
Hi everybody,I would like know, how Pro/web.link works.if possible, someone could show me how increase my engineering tasks.thanks in advanceGabriel Rocha
SolidWorks makes it easy to view all the constraints in a model. When I try to do this in Creo, I have no clue where to begin. No matter where I look, there seems to be no button or menu for viewing the constraints in my model—which of course limits my ability to change them. Can someone please educate me on where to find this very basic and important info? I feel like this should be immediately obvious and intuitive by merely glancing at the GUI—you know, as in SolidWorks.
Clint,Thank you for posting the link to the place to find the compatibility of the computer with the software.Sluething to see how I could find that on my own was a little more difficult. I found the link in the Quick Links on the Support home page.https://support.ptc.comIn the Platform support, thing seem to be quazi alphabetical, but since they look alphabetical, you may miss what you are looking for. Here are a couple of examples:Also, could you add this to the drop down menu from the top:I would have search these tabs first to try and find the information and would expected it to be under the Support Tab if not on an earlier tab.Thanks,Dale
Question for Creo expert users: I'm cutting a 3-sided rectilinear notch into the periphery of a disc, and Iwould like to know if the "add taper" option can be used to create 2different taper angles, one angle applied to the 2 opposing sides of thenotch and another angle applied to the 3rd side. Thanks in advance, --Jim James WittesMatthew James, LLCPrinceton, NJ609-921-9056-
Thanks Randy! That's exactly what we were looking for.I had tried Mike's suggested method but couldn't get Distances to show up.
All -I have a user doing an offsite presentation in a few days, and we are looking for a (preferably free) model viewer so he doesn't have to deal with our VPN or logging in to Creo. I did a quick search here and see several older posts for products from eDrawings, Kubotek and Delcam - is there anything new and exciting that we should look at as well?Thanks in advance -Chrystal JohnstoneSeattle, WA
Is there a way to show multiple results of Measure > Distance on the screen at the same time?TYIA
Is there is a way to open my files from the academic version of Creo 2.0 to a commercial version?There were many useful applications I did during school and I would like to use them as resources.
Does any one know of any documentation relating to modelling best practice in Creo Parametric? Either on here or from PTC (or even the wider world). I'm looking to create some documentation to define a company baseline standard for new employees.Many thanks.
Hallo zusammen,gibt es irgend einen Grund, weshalb die Annotation immer länger zum Laden/Öffnen braucht?Gibt es da irgendeine Datei, die vielleicht von Zeit zu Zeit zu leeren ist, damit der Öffnungsvorgangschneller vonstatten geht?Mit freundlichem GrußWerner
I work on STL data with Restyle environmentI want to close an open gap(below). Fill hole tool does not work because it requires closed loop(so far I imagine this could be a cause)I thought I can add faces but, created ones do not maintain the shape/curvature of adjacent facesHow do you solve such issues?
Hi I am using creo 2.0 and facing this error while iam constraining a component.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.