Recently active
Hi All,My colleague sent me a .pptx file in which it contains the step file.If I open it directly then it opens, but I want to save that file in my computer.How can I do it? I have tried by renaming it to .Zip file and then extracting it, but no useYogesh
Is there a way to automagically add a parameter when exporting a ProductView file from Pro/E (WF5)? I've looked through the recipe editor, but have had no luck. Ideally, I would like that parameter to have a string valuethat is alreadypopulated.Thanks!Joshua Houser(have I talked to you about FIRST robotics yet?)Pelco by Schneider ElectricMCAD Range Technical Officer
Everyone,We could use some advice regarding what other companies, particularly those in consumer electronics, are using for accuracy values in Creo. We've been using relative accuracy as a default, and of course that comes with a lot of issues. We're exploring values for absolute accuracy, and we thought to reach out to the community to hear your experiences. We've heard that Motorola, for example, uses 0.003 mm. Can anyone share what you're using and successes and failures from your approach? Thanks in advance.David R. Martin IISenior CAD Application SpecialistAmazon
How do you pan in Creo? Is it on the menu? Or do you do something with the mouse? Is it possible that you can't pan?
Hello,is it possible to add a Tuned Mass Damper to my model in Creo Paramtric 2.0?Thanks!!
Anyone have Material Library apart from inbuilt Library ?or Density Chart for all Steel Grades.
Does anyone know the keyboard controls to allow you to travel around your model without having to resize your screen? The control is supposed to allow you to drag your mouse to the desired position.
Morning fellow 'Creo' users!I'm wondering what methods or software people use to clean out the multiple file versions that Creo creates when you repeatedly save a file??Know a quick way of doing this? Anyone point me in the direction of a decent (free) piece of software that would clean up and just leave me with 2 or 3 copies of each file?Thanks, James
Hi Everyone,I have an issue of text getting scattered in drafting when the fint is changed. how to sort it out?
For this user's problem, How does a search on CSfinder ......[cid:image001.png@01CFF9CB.653122B0].......Possibly give this result?[cid:image002.png@01CFF9CB.653122B0]
I have been able to create a half section by using the 2D cross-section>Half sectioned area but I can't seem to get a broken section line in the referance view. Will CREO not do this or am I missing something?CREO parametric 3.0Thanks for any help.What I did.The result.What I am wanting.
Hi, In creo is there a way to fill the hole? see the attachment.Thanks!
What I have is a bushing from a customer with slots and holes in it. the holes and slots are dimensioned in the "unfolded" detail view of the bushing. I was wondering (being new to Creo) if there was a way to model the flat view and then "wrap" it"?Thanks In advance.Scott
I gave the default speed and feed for each tool and when I call the tools for operations like Roughing,finishing etc.. the default value doesn't get updated.Give me some suggestions how I solve the issue.
how to create a solidify?what is the importance/advantages of doing so?
Hallo zusammen,ich habe folgendes Problem:Ich habe eine Maschine (Laser mit Scanneroptik), die vom Grundaufbau der Software her nur 2D Dateien verarbeiten kann, sprich DXF.ich würde allerdings auch gerne 2,5D Bearbeitungen realisieren können. Hierzu erzeuge ich mir aus einem 3D Creo Modell durch den Schnitt einer Ebene mit der Volumengeometrie Bezugskurven. Durch Mustern erzeuge ich somit quasi ein Schichtmodell meines ursprünglichen 3D Körpers. Wenn ich die Volumengeometrie nun ausblende, bleiben nur noch die Kurven zurück, welche ich dann als IGES speichere. Jetzt fehlt mir noch der letzte Schritt --> die 3D iges oder Bezugskurven mir Schicht für Schicht als seperate 2D IGES oder DXF ausgeben zu lassen, damit ich es in der Lasersoftware wieder importieren kann. Die software importiert zwar auch Iges aber nur 2D, sobald eine Höheninformation hinterlegt ist, funktioniert das nicht mehr. Mir wären auch am liebsten, die einzelnen Bezugskurven als seperate DXF zu bekommen. Hat da jeman
Has anyone tried using the Windchill STEP Connector for PLCS (Product Life Cycle Support), AP239? We installed it, but can't figure out how to configure it per the Windchill Customization Guide 10.2 M020, or how to use it.http://www.ptc.com/view?im_dbkey=161141
This error just started popping up. Any help / clue as to what may be causing this:Thanks, Dale
What does these symbols mean? That the assambly is not correct assambled? Thanks!
I downloaded the PTC World Car Dataset. Here:
In the revolve attached here i have revolved first the shape & after that i have created holes.but the problem is that when i am trying to edit revolve shape i.e. i am giving 320 rotation with symmetric option it gives error.If any buddy can solve it plz help me out!thanks
hello againi have a problem , i not understand type of filles i have many filles who have the same namefor example armatura.part1 , armatura.part2 ....i delete old version but not disapear all version so we remain with oneplease tell me how work with filles in proe, how proe workingtks
I am trying to creat elbow but it is require to give both dimensions for unbend and bend pipe.Also want to show in Pro-detailing.but I am not getting how to do it.
Embedded browser showing all black. If I delete the tab and start a new one it works fine. Anyone seen this before on Creo 2 or 3? If I do a view source, the source shows what I would expect to see.
Hello,I would need to know how to make a footer in a model tree to ensure that some features (for ex.mass properties) will remain always at the end of the model tree.Thanks in advanceB.R.T.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.