Recently active
Creo 2, M160 (I also tried Creo 3, M070 with the same results)I have a sketch consisting of a single arc and I want to control the length of the arc, not the radius. I've constrained the ends and I've tried adding a perimeter dim or adding a chord dim by selecting the arc, one end, the other and then middle button. Creo won't let me add the dim, it thinks the dims are too small. I get an error "Please increase the number of digits" or something about sketcher accuracy. I can get it to add the perimeter dim, and I tell it to vary a linear dim that is 0.002", however it flattens out the arc to it's maximum length and turns my 0.002" dim to 1148.477". The sketch is then locked up and unchangeable.There used to be a setting for sketcher accuracy, but I cannot find it. Does that still exist? If not, how do I get Creo to accept this perimeter dim?I cannot share the model due to client confidentiality.
I'm working with Creo 2 M130 and find that I am unable to group copy geom features in a skeleton. I can't think of a good reason for this. Does anybody know of one?Thanks!
I am gokul Am using CREO 3.0 Commercial version. First i used CREO 3.0 Tryout version to draw. Now i cant able to use the files in commercial version that i have drawn in tryout version. So kindly help me out. Is there any way?Thanks in advance
.....when I hit the little "X" box up in the far upper right corner, it closes very quickly!
Does anyone have experience using a digital pen/tablet to facilitate CREO mark-ups? If so, could you recommend a good digital pen/tablet?
Has anyone of you tried to use Onshape (Full-Cloud CAD | Onshape) ?If yes, what is your opinion about it ?Even if it is not as capable as Creo yet, the team is coming with improvements at an impressive pace (releases every months).Do you know / think that PTC has any plans to come up with a cloud based CAD software ? Having a cloud based software sounds like it would be a good way for PTC to get rid of people using cracked versions, especially in countries with very "lax" copyright laws...
Bonjour,Dans une mise en plan, est-il possible de réafecter une région de répétition à une autre représentation simplifiée d'un assemblage (sans passer par l'étape : Destruction de la table) ?
Hi,I recently added a windchill server in Creo.Post addition, all my files get stored in my workspace and it crashes often.Kindly help me out to remove the workspace and the windchill server, unable to delete it.ThanksDeepak
Folks,I'm trying to define a symbol that includes 'boxed' variable text in a note. I define the note with the '\' prefix & suffix. But when I place the symbol and try to enter @[100-T@] to replace the @[NOTE@] in the note, I get an error as shown in the attached picture. Does anyone have any ideas to get around this, or am I doing it wrong?Best regards,Ray Aviles
Recently I had to create some scal reference for a presentation and I thought I would share them with my fellow Creoittes.These are Creo 2 models with X, Y and Z grads centered at the origin. one has one inch majors and the other has millimeters with major grads at 1 centimeter. Both have patterns that allow for as many grads as you want. Play with them a bit...it will make sense.Hope you find them useful.Merry Christmas.
Hi,Creo 3.0 Parametric Showing pop up massage "Error writing file ; check disk space or write permission"
hi, ich benötige Hilfe...!
how to chagnge default unit in creo parametric
Does anyone have a model of a John Deere implement that mounts to a 623R series loader.I'm working on a 6105M tractor that uses the 623R series European loader arms but can't figure out the attachment without some type of implement.All I keep getting is the skid steer version and that's not what the Europeans use. The implement would have finger like hooks on top and pin holes on the bottom.Thanks,Len
Hello everyone, I am trying to sketch an involute curve for centrifugal pump casing. Can you please guide me how to sketch an involute in sketch mode.
How can I view a list of recently opened files? (longer than the 25 max allowed under the file menu)
Hi.In my company we use CREO2.In some notebook ( Windows 7 pro) the reconfigure.exe tool doesn't work.It doesn't start at all !In some others it works.Any idea ? Thanks a lotPier
Anyone else having issues opening NX files? It seemed like I could open these files more successfully in F000. Could be my imagination I guess, but I testing the functionality out on 8, 8.5 and 9.0 before we made the jump.Let me know if there is a setting on import or something stupid I am missing...I get the"can't be retrieved message"Thanks
A user is receiving the following error. "The value for MASS_GR cannot be changed". The material properties have the correct units and agree with the standards we apply. Any thoughts of what could be the issue? Thanks CREO2 m120 ~ Windchill 10 m20
Did anyone of you encountered such problem? Do you know how to solve it?
I put a thread up about a third party plug that requires datecode U550, I'm running F000. I have no idea how to get maintenance upgrades. Any help on this subject would really help. Thanks
I have the relations to be inputted but dont know where to start when i try the sizes i get are too smal not sure what im doing wrong, any advice would be a great help thanks in advance
Solids are shown as a shell when section view is activated on Creo 2.0;I think this is just a configuration, but I couldn't find it. On ProEngineer 4.0 it wasn't the default.
amount=pro_mp_mass relation does not update.Mass properties report lists 17.34 lbs, amount param shows 34 lbsmaterial = steel
How can I edit the attachment point of my "SEE DETAIL ?" note when I use the ellipse boundary type on the parent view in Creo 3? I've tried right mouse clicking, and there's no option there.Thanks in advance for your help,Geoff
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.