Recently active
From edge, can we get its Vertices. there is something called PRO_EDGE_START and PRO_EDGE_END. But how can we get the object of the verices.
is anyone currently using wildfire 2 build m210 or m220 and what do you think about it as far as stability?thanks in advance,Bob
Good morning, I am starting to use WF3.0 and notice that they changed theAnalysis> Measure box. Now instead of the box where you can switch fromDistance to Length or Diameter you have to go back up thru Analysis>Measure>and then reselect what you are doing. Is there a way to get the box back?Thanks,Son NguyenWF3Windows XP pro
I know what it feels like to think about expanding your trading possibilities. Reality is that you cannot do that without using new promising stocks. Keep reading and find out how you can outrun other traders! Reap the benefits of this stock which lots of people have bought lately! It will be days before it hits it big.Get IF NX First Thing Today, This Is Going To Explaode!Infinex Ventures Inc. (IFN X)Current Price: 0.92Company Overview:Aggressive and energetic, Infinex boasts a dynamic and diversifiedportfolio of operations across North America, with an eye on internationalexpansion.Grounded in natural resource exploration, Inifinex also offersinvestors access to exciting new developments in the high-tech sector and thebooming international real estate market. Our market based experience,tenacious research techniques, and razor sharp analytical skills allowus to leverage opportunities in emerging markets and developingtechnologies.Identifying these opportunities in the earliest stages
Rendering Gurus, I have been beating my head against the wall attempting to get rid of avertical shadow line in an image that I am rendering using Photoluxrendering engine. I have tried moving lights, adding lights, removinglights, but it seems that no matter what I do, the shadow line remains. Theonly thing I can definitively say is that if I rotate the model a little bitprior to rendering, the shadow line moves a bit to the left or right in therendered image. Has anyone out there come across this and have a solutionfor me? It may be difficult to see in the attached image(which I hope showsup in this message), but hopefully you can understand what I am talkingabout regarding the shadow line. All input is greatly appreciated! Scott W. Schultz3D Relief Inc.
I am looking for anyone has modeled a human in Pro-E and to whatfidelity. NASA is developing new Crew Exploration Vehicle requirementsin Pro-E and could use a fully articulated human.
Pro/Users,I got the feed back I have always received with this issue. People on bothsides of the camp and some in the middle. I was curious to see if PTC wasteaching one method being better than the other. I fully understand theadvantages and problems with both.Honestly, Internal Sketches have more advantages than problems whencompared to external. This is my opinion and I am sticking to it. Thereis a place for External Sketches but the reasons to use it are fewer.I will now post the replies from the community and remove the names toprotect the innocent. Thanks for your replies. It always helps to knowwhat the pulse of the community is.
We're currently playing around with adobe 3-D for passing model data to clients. It works "ok" compared to edrawings but the cost is significant at around $900. This could be justified if we could get it to work properly with FEMAP. Anyone out there have any luck getting it to work?Thanks,--
All,Has anyone ever had any problems calling ProWindowRefit on the basewindow? I call ProWindowCurrentGet then ProWindowRefit and I get aPRO_TK_E_NOT_FOUND error. Any thoughts? Patrick WilliamsApplication EngineerSteelcase Inc.
I need to create a involute spline and need help defining one or I can modify one that has been created if someone has one I can use...Thanks
Hi,I apologize for the off topic request, but I can't do a lot of Pro/E atthe moment as my HD has crashed. I am attempting to recover my filesfrom my HD using knoppix, but it does not properly recognize the scsidrive (sees it as a 1GB drive instead of a 36). I am thinking thatknoppix needs drivers loaded for the adaptec scsi controller (AIC 7920),but I am not sureSuggestions on how to load scsi drivers for knoppix on an HP XW6000?TIA,Andrew AmsdenCAD\PDM Admin***** NOTICE *****If you are not the intended recipient of this email, you are notified that disclosing, copying, distributing, or taking any action in reliance on the contents of this email and any files transmitted with it is strictly prohibited. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify - or 1-800-MIDMARK (1-800-643-6275).
Okay, bad choice of words, but lingo or terminology is exactly the point of this message. After hours pouring over the Help files, Verification models, etc., I'm no closer to being comfortable with the Dynamic Analysis (Structure) interface. This seems like a simple problem:A large structure (vibratory conveyor) is vibrating due to an eccentric driver mounted on a motor (these things are fairly common on vibratory feeders). I am going to be bolting my device to the structure and want to check out the response...look for weaknesses.Speed: 900 RPM so Frequency is 15 HzAmplitude: +/-.125" at 15 degrees from verticalThis seems like a Base Excitation loading, but the UI baffles me. It may be that there is more than one way to skin this cat, but if you know of one I'd love to hear about it. I'd like to be able to run the 15 Hz against several iterations to determine response, as well as graph the system response to speeds ranging from 10 to 20 Hz.Thanks,Gavin B. Rumble PESolid Engineering
Thanks - Robert
Hi all,Can anyone help me to switch off Geom Tol datums ?If i switch off planes other planes gets switched off, but not the Geom Tolplanes.Thanks in advance.Ram
Hi, I am a new user to pro-e. Can some one help me out in creating my model please. I have solid models A and B.I want to carve model A so that model B fits accurately in it. Let me re-define the problem, Can solid model B be deduced from solid model A so that a cavity is created in model A? Actually model B has a 3D profile which can't be sketched in 2D plane. Thanks Majd Send instant messages to your online friends http://uk.messenger.yahoo.com
Hi,Anyone knows how to edit or create the .bif files used in the dialogs for icons on PushButtons?I want to create new icons to be placed on Push buttons.Regards,Vinay
Dear Gurus:How can I see the axial forces (or axial stress) on fasteners?I'm using pro-mechanica Wildfire 2.0.Elver DelmastroED IngenierÃÂÂa
 Hi, I got stuck up with a strange problem, i created a broken view which i no longer require but i am not able to remove it ( i.e bringing back the full view) ,so i had to deleted the view . I want to know it is possible to remove the broken view and get back the full view .RegardsPradip
Lyle,Did you ever get a response to this question?Thanks,Don
Has anyone checked PTC's pro/e human factor library against mil-std-1472? Thanks. Raytheon Chris Rockhold Naval Array AntennasSr. Tech Support Engineer II 978.684.8942 phone978.440.3322 fax- Integrated Defense Systems Surveillance & Sensors CenterMechanical Engineering DirectorateAntenna Systems528 Boston Post RoadM/S 4-1-634Sudbury, MA 01776USA
Hello! I have extract the ProSection using "ProFeatureElemtreeCreate ..."I'm not able to Display the returned section.Can anyone help me?? Thanks!Greetings Lars
I have a process efficiency project where the user needs to open multiple unrelated objects, whose names could vary. Instead of them doing a file-open mutiple times, I'd like to list the probable files in a GUI list, allow the user to select several of them, then retrieve them into session (not display them). My question concerns the end users abilities in the listbox. Can a user select (highlight) multiple items in a listbox while holding CTRL key down?ProUIListSelectednamesGet says it Gives the names of the currently selected ITEMS in a list. I assuming "Items" means plural, but just checking before I sink a lot of time into a test, because the GUI apps can be time consuming.
Has anyone tried the autosave script put out by Cogras for Pro/E Wildfire 1 and 2???http://www.cogras.cz/index.php?id=products_autosaveIt is free to use, I was wondering if it is PTC approved...Mark NerbyFluke Corporation
I figured out the problem with the retract.Each sequence has it'sown separate NC SEQ CYS.When setting up the operation I created a MACH CYS and also created a retract plane offset the Z MACH CYS.I went into the operation and removed the retract plane.Every thing is working fine.Thanks for your reply's.In the custom dialog boxI removed the auto plunge,there is no retract to remove. Thanks, Rick
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.