Recently active
Are the Copy Geom and Publish Geom functions available in the base Foundation XE package?ThanksBrad
Our it is trying the resize the vault. He went to ptc and the knowlage base is not helping with this issue. Anyone out there know how to do this?TIA
Is there any way I can stretch an portion of a model to make the model longer ? See picture - I want to stretch the length by adding the blue section (same cross section as the adjacent red sections). Thanks guys.
NO, that's not correct... I have M090 and MANY of the fixes were inthat version. From what I remember of an email posted from someone atPTC who seemed to be in charge of this a while back there was only ONEminor improvement added on in M100... Paul Korenkiewicz FEV Engine Technology 4554 Glenmeade Auburn Hills, MI, 48326
Does anyone know what's new in ProductView 9.0? PTC's product calendar lists the first customer ship date for that updated release as September 2007 (which we're nearing the end of):
Hello, I am working on a project of a bridge that consists of two beam profile and attached parts to it and these sub parts are attached via rod to bridge. In my model some parts are in ‘Shell’ format by idealization, and other parts are in ‘solid’ phase. According to provide fixing (connection) between subassemblies and parts, I use ‘mesh’ command but I faced with this runtime error. Could you help me as soon as possible. you can ask me if something is missing, thank you.
Hello Everyone,I wanted to point out a disadvantage I have noticed. When you reply by email there is no history on the thread of the great responses to the question. When someone searches for a question they may have and finds a thread that already asked it. It's empty because everyone replied by email and not the thread.I think it would be a bigger benefit to the community to have the responses on the original thread. I deleted my emails by mistake and lost the replies I received on my question.What do you guys think? "If you are not living life on the Edge, You are taking up too much space"
Hallo und moin, ich bin neu und suche nun schon lange die Möglichkeit einer manuellen eingabe zur Definition des Durchmessers, Länge etc. Beispiel: Ich zeichne einen Kreis und möchte in genau auf einen Durchmesser von 10,52 mm haben. Die Änderungen möchte ich nachträglich in irgendeinem Menü vornehmen. Leider ist ja kein Handbuch dabei und ich finde den Button für diese Funktion nicht. Bitte um kurze Hilfe Viele Grüße Michael
Hello all,I am upgrading to wildfire 3.0 from 2.0. I would like to play a video at our next users group meeting that gives an overview of the enhancements. Does anyone know if there is anything available for download or a link on the PTC web site that I can use for this?TIABob FrindtSr. DesignerParker Hannifin CorporationGas Turbine Fuel Systems Division9200 Tyler BoulevardMentor, OH 44060 USA
Is there a way to have Pro/E report the pro_unit_length andpro_unit_mass in the modeltree We've received model from all over the world. (imperial & SI)during conversion to SI things got messed up with densitie units This resulted in way to big masses I'm looking for quick way to check which of the parts have wrong units Hope you help me
I need to be able to have users in a specific role(Change Admin II) on the team tobe able to reassign tasks from a workflow for other users. Does anyone know if there is a specific ACL setting that I can grant to give my Role access to do the reassign on open workflow tasks of others?
Is there a way to create a multi-line text in sketcher? I notice thatthe help doc states "Enter text manually-Type a single line of up to 79characters of text.", but there is no mention of multi-line. Thanks inadvance for any info. WF3 M100 Mike BillsIngersoll Cutting Tool CompanyRockford, IL
Specifically, I am looking for a pistol grip blowgun, Mcmaster Carr #5668K21, but anything close will do. Thanks in advance.John Bettencourt
Does anybody have a model of a coil spring with ends properly blended such as what is used in a clip board? I need my ends to have extensions on them but I just cannot figure out a good way to do this in my model. I can fake it but I'd really rather not do this. IF anybody has a model I can look at for reference I'd sure appreciate it.if you can, please e-mail a model to michaelpaul@san.rr.comThanks for the help.Michael
Pro/EXPERTS. ProE has a COMPOSITE module that is not very good, from what I recall. Iremember (3+ years ago) that there is/was a third party software packagethat can handle composite designs and it will integrate with ProE. Cananyone point me to this company? Thank you in advance. Sincerely, Andrew Burke
Hi there, I'm interested in finding out which major Australian companies use Pro-engineer (preferrably Wild Fire) as I would like to apply to them for a position. Thanks in advance 😃
Well, no replies. That tells me something right there. Thanks.
Fellow users, for some reason this person listed in the email below seems tothink that it's all right get onto the exploder list in order to get useremails so he can sell his products. This is my first time dealing with asales guy stealing email address for personal gain. Anybody else had to dealwith this and if so what did you do to get it stopped.Curtis SmithAida America Corp.
Pros,Is anyone using "Zero Wait-State" utilities to manage their data? Ifso, could you let me know how it is working for you? Thanks. I'll posta summary.
Good afternoon, Since I'm the one that started this little email gripesession, I think I should try to rap it up so to speak. One of the pro/userssupplied me with Jeff Z. name and said he was the proper person to send theoffender to and allow Jeff to determine what actions needed to take place. That is exactly what I did and to Jeff's credit he said he would talk to theindividual and ask him not to use the exploder list in that kind of manner.Jeff also said that this was the first time that he has heard of Oliverusing peoples email to try and sell his services. My reply to Jeff wassimple, don't boot him off of the exploder list for one time issue. Jeff Z. is the gate keeper for this exploder list and since this was thefirst time ever receiving what I would consider Spam mail I think he hasdone a good job. And if we all continue to report abusers to Jeff, theexploder will continue to be pretty free of Spam. For those who think I might have went a little overboard (and there weresome) pl
We are sponsoring another survey for PTC - Digital Rights Management - here is another chance to get your voice heard! Digital Rights Management SurveyJeff Zemsky
Does any body know IF PTC is thinking to add non-linear material properties (plastic deformation analysis - hardening) to pro/mechanical in future relases?. Thanks.
Hallo bin ein Neuling in Sachen OSM. Habe die letzten Jahr mit Inventor und Solid Works gearbeitet soll jetzt einen schnell Einstieg in OSM machen. Bekomme aber leider keine Schulung zu teuer! Wer kann mir sagen wo ich ein Handbuch für die Version 11 her bekommen damit ich mich wenigstens ein bisschen einarbeiten kann. Bin für jede Hilfe dankbar.
I am looking for a very basic free model viewer that can view IGES format.If it could take a few measurements, that would be good too. Any recommendations? Thanks, ErikNo virus found in this outgoing message.Checked by AVG Free Edition. Version: 7.5.485 / Virus Database: 269.13.15/1003 - Release Date: 9/12/200710:56 AM
Those of us using ProdC have known this for a few months, PTC has given us until the beginning of the year to find another solution. Supposedly there is a possible solution but my understanding that PTC hasn't notified SofTech if that solution is viable yet. It seems like PTC is trying to cut the legs out from under those of us who have not decided to accept the one company plan that they have been pushing for a couple of years now. I do not have the time to research a new PDM package until after the first of the year so they have really put us in a bad place. We are hoping that this possible solution will work for us, but it will require us to shell out more money to PTC for it to work, which is what they were looking for all along, I guess.When the ProdC users had a conference call with SofTech, approximately a third, from what I heard, were looking at another CAD package, because they do not want this to happen again in a few years when PTC decides they can no longer partner with AN
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.