Recently active
Hi, I want to do an extrusion diagonally to remove materials from a wing model. However the extrusion that i was able to do is all 90 degrees. Does anyone know how to solve this? Currently using pro engineer wildfire 2.0, education version as it is on the school computer. Thanks.
Hello everyone,Trying a new operation in Pro-E and can't find a way to get it done. I have logo work in a native Pro-E file. (a number of sketches, text extrusions, etc...) I'm trying to find a way that I can import that .prt file into another Pro-E file. Most other softwares I'm familiar with, this is a simple File:import.Does anyone know how I can do this in Pro-E?thanks in advance,greg
Is there a way to put a plane in ProE using plane equations (a,b,c,d)?
I got only one response to this, from someone who saw the same behavior inWF4. The solution was simply to open the folder from the previous analysis& go from there -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>
I am looking for a way to adjust the line width wider or brighter for selection or pre-selection--or any highlighted edges? I find it very difficult, sometimes, to see the highlighted edges or errors.
Please let me know Quad Core CPU system is best perfornance for Wildfire 4.0 than Dual Core CPU system? or is the same? thank you.
Hi all,Is there some way to assign temperature dependent conductivity properties in stand-alone WF 3.0?Joe ColichBoeing - STL
Found it:Format > Text Style Gallery -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>
In WF2, drafting mode: When I modify text style, how do I save the textstyle as a Style Name to appear in the pulldown at the top of the box? -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>
What are the build differences between Productview 9.0 release M040 and M060? Is it worth the upgrade?
I am on a team competing in the RWDC and I'm having trouble importing coordinates from a .txt file into pro/e, and I have no idea how to go about doing this. The coordinates below are what I'm trying to import, which is an airfoil profile. anonymous wrote:1.00000000 0.00000000 0.99799331 0.00036522 0.99198809 0.00145219 0.98202615 0.00323861 0.96816880 0.00569834 0.95048690 0.00881433 0.92920588 0.01237637 0.90451466 0.01645622 0.87648374 0.02123403 0.84556226 0.02680163 0.81180321 0.03308275 0.77537373 0.03996767 0.73699103 0.04733843 0.69648100 0.05519045 0.65449658 0.06339765 0.61134464 0.07179496 0.56702868 0.08033999 0.52256617 0.08829137 0.47741597 0.09585161 0.43302357 0.10200580 0.38857262 0.10745148 0.34555731 0.11138214 0.30356427 0.11408964 0.26313877 0.11529117 0.22456275 0.11508254 0.18814776 0.11339912 0.15455522 0.10978344 0.12344136 0.10437932 0.09543672 0.09649843 0.07075211 0.08608142 0.04950788 0.07367000 0.03190809 0.05965034 0.01796495 0.04519710 0.00803419 0.03097
Like it/hate it? I SHOULD have mine up and running this afternoon after dealiong with the usual NightmareLink issues. Opinions?Thanks!-------------------------------------------------------------------------------------------------------------------------------------------------------------------------Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.Dr. Seuss
Editor Al Dean was in attendance at the event 1/14 - 15 in Needham and was posting real-time updatesas topics were being presented: http://www.develop3d.com/labels/PTC%20Media%20+%20Analyst%20event%202009.htmlIncludes announcements about Pro/E Wildfire 5, new PLM offerings, customer case studies, etc.
thank you
Greetings, I have a need to animate a model that involves some deformation ofmaterial... And, I am as green as can be in this realm. (I know very little aboutanimation.) I am pretty sure there is a tool in Pro/E that can help me animate. Is itone of those $5k modules, or is it included in Foundation? Are there twoversions (basic and pro - like rendering)? If you know and have any opinion on it, could you please take a couple ofminutes for me and type out your thoughts? Much appreciated... Thanks in advance! -Nathan
Does anybody know what has been fixed with Wildfire 4 M061 build?So far this build is only available for the Solaris and HP-UX platforms.and yes I have already done the following:1. used the "Update Advisor" however M061 is not a selection for build codes2. tried searching for M061 on PTC's "Search the Knowledge Base"3. I have opened a call yesterday morning after attempting 1 and 2. However I have not heard back yet. It evidently takes a long time to a. call development and b. to call/email meI am wanting to know this information because:1. a build like this generally means there is a bad problem2. we are updating from WF3 to WF4 M060 on Monday.Thanks--
Would anyone be willing to send me a ProE model of a Chevrolet or DodgeRam or Ford F-Series pick-up truck today? Or would anyone know where toget a model? Madhav RaoDRS C3 Systems, Inc.1200 E. Mermaid LaneWyndmoor, PA 19038215-242-7237
Att: Pro GurusI'm looking for the proper "plotter_command" value to set up a network laser printer in my PCF file.Please advise.Thanks,James WittesMatthew James, LLCPrinceton, NJ(609) 921-9056-
If you do an Advanced Search or a Context Search you will be able to multi-select and Check Out or Add to Workspace.yes this should have gone in the Solutions list.Steve D.Quoting Chad Gentry <cgentry@sanyamerica.com>:> I think I placed this in the wrong category, sorry.>
Is there a way to put a hex around a number without using a symbol?Like @[9@] yields a square around the number 9.Thanks
Yeah, just as I suspected... They meant to do that. Or, more accurately,it needs to be like that. I understand, and I was gently reminded that itreally is my mistake. One thing I learned is for that reason alone is a good argument for creatingand using external sketches. If one is in the habit of creating a sketchfirst, then choosing the tool, my "problem" goes away. As well as theannoyance of picking extrude by habit when you really want a revolve...That happens occasionally, too. What I DON'T understand is why, if I forget to select SURF and leave theSOLID default, why, oh why, can Pro/E not simply default to a THINprotrusion? The solid selection remains but the dashboard locks you into athin solid. This would at least save a little bit of time / frustration...And, I think it actually does do this 'sometimes'. I guess I need to paymore attention when it does happen. Thanks again for your help... -Nate _____
> Quick question, > Say you perform a wild card search in Windchill and get 20 results. Is > there a way that anyone knows of to now add those search result objects to your > workspace or to check them out to your workspace directly from the > search results window? I can’t see one? (see attached) > Thanks, > Chad
Does anybody have any idea when the ""migrating our registration process to a new platform"" will be finished?
I sent this summary out yesterday afternoon however I only sent it tomyself so this time I am really sending it to the list.I have now gotten a response out of PTC tech support:
Ho installato la versione Personal Edition del programma; avrei la necessità di creare dei fori filettati ad esempio M6x10 M7x15 ecc. con tanto di preforo standard. Non riesco a trovare la libreria standard relativa ai fori lisci o filettati. Dove si trova? Dove devo eventualmente scaricarla? Un programma di modellazione 3d così legata al disegno tecnico non può essere sprovvista di tale accessorio!!! Grazie per l'aiuto
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.