Recently active
. The disk has a diameter of 120 and a thickness of 30
I am student in IUPUI. I want to download creo 2.0 and i don't know how to do that. I need help urgent.Thank you,Varun Naidu
Personally, I feel like I am disassembling the bomb of dust2 zone b.
I am in Creo Parametric Format (.frm) model. I revised my format to be 1422.4 by 863.6. But my SIZE tag at the bottom of my display screen is showing 1397 by 863.6 I select the SIZE tag and do a “Define”. I update the “Grid Outline” and the “Grid Origin” by the SIZE tag never updates.So how do I update the SIZE tag?
Is it possible to create geometric tolerance related to a spitted datum feature that was build out of two surfaces 2xA or A & B?The tolerance zone should be created as common zone (CZ behind the tolerance value)
Hello, can we analysis wires stress in creo like attached video?
good morning, when I go into conflict the sketch that I have to update the references, the window is fixed and is not allowed to edit or enlarge .. why? I create in 3 you could be done.
Hey All,I have imported some DXF geometry into a sketch (I have done this hundreds of times over the years).My customer asked me to move the geometry slightly, so I redefined the sketch and attempted to MOVE & RESIZE to the geometry by windowing it in and moving it. I moved the geometry by picking it up and manually moving it with the mouse and cursor AND also by entering offsets into the MOVE & RESIZE dialog box. Looks like it is working just fine until I ACCEPT in the MOVE & RESIZE dialog box. I keep my eye on the geometry and see it snap back to its previous location.The only way to overcome this seems to be to delete the existing sketch and then re-import the DXF file into the sketch.Any ideas?TIA,--Neal
I want to ask, how many people are using "Hide and Isolate" vs. "Hide and Unhide", to decide what layer items are to be visible in the display.For those that are using Isolate:Did you find that it changed how you defined layer rules?Are you creating fewer layers?Are the rules for those layers less complicated?
In MBD we are driving towards using 3D Annotations instead of 2D detailing. Now you have two options to do this:1. Do all model designing in the beginning then do all the 3D annotations in the endor2. Model and 3D annotate at the same time. Build some features... annotate... build some features... annotate - this way you remember what is important.My issue is with the 2 option. It seems that when working with MBD there is a load of rework required for each combination state IF you use a different size view than just the standard orientation. Are companies just telling users to wait till the very end to annotate and verify all annotations prior to release?An example:I have created a small feature on the model that I now want to add a new combination state to detail. In the days of 2D drawings I could add a detailed view with a center point selection (as shown).As the designed progressed, my 2D drawing detail view is still centered on the feature it details because of that center point s
Hello.Is it possible to lock one view movement with another view? I can't find that option, because alignment still allows the view to move in one way, and that is not good enough for what I need. I don't know if that is possible, any idea to do it would be appreciated.Thanks in advance.
Sketches don't appear in model window after creation in Creo 2. The sketch appears in model tree but not in model window. All layers are shown.
Please share if any one knows
The scenario is/our requirement: We create wrapper over pfcsolid and store it. If Creo modified the pfcsolid (by deleting or adding or modifying faces/edges) during any event, we want to capture the deleted/added or modifed faces/edges so that we can update the wrapper at our end appropriately. Workaround from PTC support: Object TOOLKIT C++ cannot track the info on modifed, deleted and new faces/edges of a pfcSolid. As a workaround, processing the IDs of faces and edges on OnBeforeRegen() and OnAfterRegen() can help identifying new/deleted faces/edges. Limitation: it does not help to identify the modified faces/edges. More ever processing the IDs and updating the wrapper is likely to result into performance issues.
PTC and EAC Product Development Solutions invite you to a free half-day, interactive forum on Creo to gain valuable insights from peer networking and the following presentations: Why Upgrade to Creo 4.0Enabling Digital Product Definition with Windchill Windchill NavigateServices OverviewUnderstanding the Value of ThingworxBreakout Sessions & Ask The ExpertsAttendees are encouraged to stay for a beer and networking following the sessions. Lunch will be provided. Date: February 22nd, 2017Time: 9:00 AM to 4:00 PM ESTLocation:Best Place at the Historic Pabst Brewery901 W Juneau Ave, Milwaukee, WI 53233For full details and to register, please use this link
HelloIs there possibility to provide thread into hole having sketch?If this is not possible, what one need to do for holes with threading having more than two taping. Refer snap for front view of hole without threading on which I need thread.Please feel free to ask in case more information is required.Thanks and RegardsKetan
I downloaded Creo 3 Student and got it unzipped into its own folder. When I try to run setup.exe nothing happens. Really. Nothing at all. I've tried running as administrator. I've even tried Win7 compatibility. Still nothing. Any suggestions/help?Laptop. MSI GT72s. Win10.
Does anyone have a scale bar symbol they would be willing to share?MY current boarders don't use scale bars but 1 client has asked for them
Hi I am using Creo 3.0 as you can see by the attached picture below there is some text (MK2) on the right support bracket. I then saved a mirrored copy for the left bracket however, the text is not correct as I need the text to read right-to-left opposite the original text which reads left to right. I have tried a number of ways of mirroring the text with no luck I was wondering if anyone has another options I could try. Thx. A better way of describing what I am looking for is I would like the text to read the same on both sides of the bracket. As you can see when I try to add text to the left side the text is not correct.
Is there any way for the bend lines and the bend dimensions to be automatically already shown on the view without having to go pick the view and pick show annotations?
Can I run creo 3.0 in laptop with 2gb ram?
There are some OOTB standard hole files in Creo. However, some standards are not supported so far. I suppose some people have created the .hol files. Would it be possible to share the files? Thanks in advance.
Hi all,I've just finished building the main surfaces for the mouse I'm building but I'm having issues thickening the bottom and middle parts into solids. If anyone has any idea what the problem is I'd appreciate the help. See attached.The model is created in the student edition of 3.0 unfortunately which I realise can't be opened in the real version.
should i intall it multi times on one laptop?
Hi,Quick question ; I would like to change the interface of the toolbar ribbon from this :to this :How?I am using creo elements pro 5.0Thanks,Yannis
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.