Recently active
Has anyone noticed an increase in file size when moving from Wf 5.0 to Creo 1.0 Parametric M010 & M020? Some of my models have grown by a factor of 10 and has caused my PC to use up all 8Gig of RAM and files sizes of in the range of 400mb to 2 gig. Anyone have any ideas.Thanks
Greetings all,I would like to find a 3D export format that will maintain the light and scene information from Creo/Elements Pro when opened in a free viewer tool such as Creo View Express or Adobe Acrobat 9.I have tried .U3D files which apperently should contain the lighting and scene information but Ive been unable to find a free program to open the file.Does anyone have any ideas of a format that will do this and a free viewing tool to open the format?Any information will help. Thanks!
Thumbnail viewer is installed, but Pro/E has decided to annoy me with messages about it again. Does anyone know how to tell it where to go with it's messages?Thanks
I can't seem to create an approximate curve in my skeleton model. Is this a limitation imposed by PTC? Any suggestions of how to work around this?Cheers!
I have a table in a drw that the user defined functions keep disapearring. You can repopulate and then scroll your screan in and out and the data disapears.
Why can't I group published features in my skeleton? I have found a work around where I create another group and then do edit definition on it... but that is not a preferable way, and I don't know if there is any other reason for not being able to group the published.
I know this may be a bit of a rant, but I strongly believe there is a fundamental lack of attention to a very critical issue all us "Pro/E and Creo"Users continue to face. I felt a post on the CAD forum was appropriate.For me, Igave up on asking for "help" from PTC resourcesover 15 years ago. I still look down at my shoes and shake my head each timeI encounter the lack "Help"within our software.Look at the attached image and tell me why we continue to accept such unacceptable things like this?This is not an isolated issue. You can find Help road blocks EVERYWHERE within the Help Center. In many cases we are given directions to a road that no longer exists! in this case, this is"OLD Pro/E" directions.This have been an issue since the very first day I started on Pro/E....that was 1989! My blood pressure just climbed up 50 points.PTC, why, why, why do we have to live with a software that is NEVER complete or correct? Functioning "Help" is the lifeblood of any software. Do you wonder why S
today got a chance to take my hand on Creo... it was not good at first site as ui is totally changed and hv to click more, plus i love my meanubar which is gone now why i love it? cause i often uses keyboard which is quite important to me to work fast. meanubar increases speed of my work. anyways i hv a problem which i dont hv before. i hv trouble to change the pen_line_width in creo. by defult it is 3 and i want it to be 0.5 but creo doesnot changes value. why is that??? i tried 1,2,3,4,5... and value change is creo donot take pen_line_width in decimals why is that?? or is there anthting else that i hv to do first?
Silhouette edges disappear in Sketcher in Hidden-Line style display in Creo Parametric1.0.Has someone the same problem?
Hello Guyz,Help me understand this,maxProcessQueues = 128,What does the 128 refer to & how will this improve the Publishing?Solutionsand toughts welcomed.Sriram R
Does anyone know if there is a way to change the amount of decimal places available for the axial depth in the tool setup in WF4. Currently it is at 3 deimal places. We need to get to 4 for very small tools. See attached...Craig BroetzmannStrattec Security Corp
Isn't there a way to see who has worked on a file or last saved a file?I thought Pro E tracked that information.WF 4.0 M170
I recently bought the student version from ptc store got the dvd installed it and then bought the elearning library. Used proengineer a few times then then next time i tried to open it nothing happend the icon would stay lit up for a second or two then nothing so I tryed running as admin same thing happens.so I tried reinstaling it and still wont start. tried running in different compatablity modes but it was working before that with no problems but just incase. I am running windows 7 home I dont know what to do now. I sent a email to - a few minutes ago hope they can help me out or you guys thanks
Does anybody have Creo in production yet?Creo definitly solves some issues that we have had with WF5. We have been testing and playing since F000. So far all of the areas we care about seem to be fine and we are seriously looking at making the leap.I always appreciate other Creo Users input.Joe
I would like to know of any Major bugs people have found with Creo 1.0 M020. I would also like to specifically know if there are any issues with Layouts or Skeleton Parts.Thinking of deploying it next week.Thanks
Hi, Creo folks.Recently, the Creo Elements/Direct pages and Creo Elements/Pro pages on Wikipediahave been marked with a ‘proposed deletion tag’. The reason(s) cited were that there is “no evidence of notability” and that the entry reads like an advertisement. Since PTC cannot provide additional commentary or links (to maintain a neutral point of view and avoid conflict of interest), others would need to do so to remove the tag. To see these pages yourself, click http://en.wikipedia.org/wiki/Creo_Elements/Direct and http://en.wikipedia.org/wiki/Creo_Elements/Pro.
RMB "Query select" has nearly become a standard method to dig through adatabase- even the largest.... When using other CAD systems, I findmyself trying it even though it's not applicable.... Let's throw some fuel on the fire! When I walk up to a display where theuser has pre-highlighting on, my first impression is "We gotta' rookiehere..." "Pre-highlighting on" is most definitely a sign of weakness.... Kindalike "teamwork" 😉 Have a great week! Eric Slotty- <">mailto:-> 414-362-2552
Proe Users,Can you make Proe not create a trail file?Ryan Crisp | Senior Mechanical EngineerPriority Designs501 Morrison Rd.Columbus, OH 43230(614) 337-9979www.prioritydesigns.com
Has anyone come across mapkeys not working in Creo 1.0 due to the change in format from drop down menus to "tabs"? I'm thinking it has to do with the main_dlg_cur command being void due to the change over?? Can some one confirm this and let me know an alternate command to use....if so?Thanks
I have a question about tables holes in Pro/Detail. How can I show the x-y origin??? Must I show the sysco???Thanks a lot!
Anyone know when Creo Parametric 1.0 M020 will be available ? Brad
I have downloaded several screws/washers etc from the pro/library and when I save the file they appear as a single item yet when I open these in Creo I am prompted to select which type/size I require. My question is how are these parts created and is it possible to edit/create my own versions? How would I go about this?
Hello everyoneIt is possible to have a blended grey transparency on inactive components (dim_inactive_components; style_state_transparent) ?ThanksPs. sorry for my english
How do you use treads for FTC?
Can I embed the jpeg file I am using for a decal, so when I send a component out to a manufacturer I do not need to send them the jpeg too?[cid:image001.jpg@01CCB012.A4C14050]The information contained in this electronic mail transmission is intended by Weil-McLain & for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please notify the sender of the error by reply email so that the sender's address records can be corrected and delete it from your system without copying or forwarding it, including any reply records.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.