Recently active
how do i create a tetrahedron or any other polyhedral model
Does anyone know the unit of measure pro pipe uses for the weight/length spot in the line stock file. I would like to not use the weight/length spot in the line stock file as we drive weight through a materials file that is not used with pro pipe. Does anyone have suggestions?
Is it possible to create acylindrical coordinate system in WF4? I only see how I can create a cartesean coordinate system using an OFFSET definedin cyclindrical terms(r, theata, z) but NOT how to create a cylindrical coordinate system.Searches of theHelp CD and these forumsdid not help. Inthe forums I found severalduplicates of this question (all being answered incorrectly with "set the offesttype box to cylindrical"), but no answers that actually produce a cylindrical coordinate system.The reason Iwant a cylindrical coordinate system is that I have an analysis I am trying tocomplete withPro/Mechanica and in it, there isa radial load that I would like to apply. I am assuming that if I apply a load with itreferenced to a cylindrical coordinate system it will allow me to define an appropriate direction vector to produce the desired radial loading. I will also be posting this up the CAE forum...thanks...
Last week I notice a problem when trying to download software from PTC using Chrome. Seeing the same thing today.[cid:image001.jpg@01CCD9E1.DF836120]I'm having to resort to using I.E. to download. Which is considerably slower.I opened a call with PTC but haven't heard anything from them about the issue.Anyone else having this issue with Chrome? I'm running 10.0.912.75 mDavid HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550
Hi Everyone I have noticed over the last year a few customers have mentioned someissues with the documentation. I am very happy to announce that of today you can report documentationissues using the online case logger
Pro/E and Windchill users,How do you put an ITAR legend on a 3D model; Productview and/or Pro/E model?In 2D I could use a Format OR A Productview stamp but how in 3D models/Thanks,Han
........think of the interface changes from Creo to WF4?I'm gonna give some time before I voice my opinion.......
How can I set the place of the General view in a drawing created automatically from a format? I got the format and the views right, but these views are out of the right place. I want to centralize them a little bit. How can I do it? Thanks
Pro/E and Windchill users,How do you put an ITAR legend on a 3D model; Productview and/or Pro/E model?In 2D I could use a Format or a Productview stamp but how in 3D models?Thanks,Han
Is there a difference in meaning when using 2X or 2PL INDIVIDUALLY? thank you, -Art....This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.
3GB Switch Summary
Hi folks,Today I launched the blog CAMZone.org, a personal project where I'll attempt to promote discussions about CAD/CAM with a strong emphasis in the CAM side of the acronym. CAMZone.org does not have any tie with advertising and the goal there is to learn and share unbiased opinions, thoughts and experiences about CAM and the CAD/CAM industry.That being said, I'd like to invite you to check it out. Hope to get your comments there!Check it out: http://camzone.org/Thank you!Daniel Santos
ProE / Creo users, Just a quick poll on employee status, if you are a CAD Administrator areyou an exempt or non-exempt employee?, I have looked into this in somedetail regarding the exemption laws - professional, administrative,creative professional and computer employee exemption. I just wanted tosee if someone has dealt with this before.
Hi Everybody,If I import an aluminum extrusion into ProE/Creo, what is the best way to cut it to exact length using Creo? For example, http://www13.boschrexroth-us.com/partstream/Search.aspxThanks A Great Deal!!
I imported a point cloud in .DXF and so far the only way I know how to make a spline is to click on each point individually. Does anyone know if there's a better method of doing this? I appreciate your thoughts.
Does anyone have data on the drill point angle for a broached hex pilot drill? I downloadad the ANSI spec for set screws and it tells me everything except for the drill point angle. I am using set screws for control orifaces. I need to hold a length of the oriface hole length. This hole length is from the flat face of the set screw to the bottom of the drill point for the broached hex drill point..TIA
Hi AllWe are looking into the use of WTParts in Windchill PDMLink 9.1 and i am having problem trying to get any info on what is best and how to use it effectively.Does any one out have any best practice's or how to information that they are willing to share.Many thanksDavid Connorwww.hanseaticmarine.com
Team, in the past weeks several emails to - userID generated some interesting feedback about Creo NC applications. In order to get a structured feedback I would like to ask you to fill upthe Creo NC 2012 survey, but clicking on the link below:
Hello Creo Users!I was curious if anyone had designed fasteners like nuts and bolts or even stuff like spacers and washers. If you're willing to share I'd [and I'm sure other members as well] be very interested in seeing your designs. The more unusual the better.Feel free to embed/attach them in your reply here or upload them into a photo album.Looking forward to seeing some creative uses.-Dan
Probably a long shot, but is there a posted list of companies that useProE for specific regions (i.e. Santa Clara County, Monterey County,CA)? Thanks, & Happy New Year to you all! -Art....This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately.
Hello, A client told me they require Wildfire 5. I have Creo Elements/ Pro 5.0installed. The download page shows this: cid:image001.png@01CCC557.6643FCA0 Are these really different versions? Are they compatible in bothdirections? Thanks a lot. -Nate
I wondering anyone out there using mfg. udf's successfully? I'm currently using Wildfire 5.
Hi, I am using Proe 4, similar to Creo. I am trying to create a standard hole with my desired diameter but I don't know how to change the diameter. Under the 'Shape', the diameter can not be changed. Anyone has any idea?
I have a MPMOperation object,want to get the .pvs file for .How to get .pvs file by MPMOperation?
Creo Parametric (formerly Pro/ENGINEER), watch a nice demonstration at the Xandorra YouTube channel (www.youtube.com/xandorranl😞http://www.youtube.com/watch?v=qugde3gXaFg
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.