Recently active
It's become clearer I need Styler for some of the work I'm doing (create new doctypes, support some existing ACL connected to existing doctypes, offline composition for this development, etc.) so I just downloaded / installed it after uninstalling Editor. But, I became aware we have a license available to me for Architect.But, what is Architect? Specifically:What can I do with Architect I can't do with Styler?; and,What
Looking back at some of my older macros I see that in several of them I change things in Isodraw to suit the macro but once the macro is finished, the changed attributes remain, they are not put back to their former state.For example I have one that adds text to a drawing and sets:Text size 7Text align base_line rightDoing this of course leaves the text size at 7 and text align at base_line right regardless of what they were before the macro was run.What should really be done is to make a variable of the existing text size and alignment settings, so that they can be set back as they were at the end of the macro.Trouble is I don't know how to extract these values. I'm sure there should be a way, but I can't find it in Macro help.
We recently upgraded to Arbortext 5.4m80 from 5.3 at our site, and the biggest source of consternation seems to be the handling of EPS graphics in the Editor window. In 5.3, Arbortext just displayed the EPS graphic's preview image, but 5.4 tries to render the PostScript on screen. This would be a good thing, except many of EPS files make use of referenced fonts (like "Symbol"), which aren't available in Arbortext's little PostScript environment, and with the fonts missing the display of these graphics on screen is poor. I'm told the same problem affects output from Arbortext's Preview command.Have others run into this too? PTC says to incorporate the missing fonts into the EPS graphics, but that may not be feasible. I'd settle for an option to go back to the EPS preview image, like in 5.3. Any ideas for working around this problem? (Admittedly this is only an issue for screen display in the Editor; generated PDF output is fine.)
My first foray into ACL today.What are some good ways to log diagnostic messages from ACL (i.e., something like a "logger" facility, etc.) - either appending list entries into an open diagnostic window (preferred), or to a log file?"response" and "message" just don't seem to cut it.
Hi,We have a business requirement to export documents from Arbortext 5.4 M020 directly into MS Word format. What is the best we can do for this?From what I've read, export to MS Word from Arbortext is only supported via RTF, taking care to use special "Word fields", "styles", "instructions" and/or stylesheets. And, even then, the Arbortext Styler Guide& Help files suggest there are plenty of limitations and "gotchas" lurking along this path.One of our "power" users suggests she has used elsewhere a feature / add-on to EPIC / Editor that can be used to directly export to, or compose into, a Microsoft Word (i.e., ".doc") format. Does this sound familiar to anyone? What is she talking about? She can't remember the feature, but believes it may be a separately-licensed add-on.Any tips or leads will be carefully followed up!Regards,-- Marty
I have made changes to the SMA stylesheet header (i.e. added logo and chapter information). I applied these changes to "ChapterPage Set Even/Odd pages".When I publish my SMA map to PDF, the header information shows up on every page except for the top level (chapter) pages. If I demote the chapter elements down a level the header information displays. How do I get the header information to show up on the top level (chapter) pages?
You can also go to Tools-Preferences and select the "View" category and the check the "Graphics as Icons" checkbox.
I'm trying to add a new item under the Help menu that will open an HTM file.I know that Arbortext has a built in view_pdf function and when I call it it does open the .htm file that I need within the web browser. However, I was wondering if there was a built-in view_htm or view_html function?Thanks in advance for your response.
Additionally:"local custom" means custom folder is located on user's C drive."network custom" means it is stored on a network share.Our configuration includes Dynamic Link Manager (DLM) to which we autologinon document load.
Hi Gang,I was curious if it is possible to customize portions of Isodraw? I would like to change some of the file menus, for example in text I would like to add the selection for "8pt" as a standard selection. This way I do not have to select other and then input 8 to that dialog box.Is there a way to customize these menus? Are there any manuals available for the customization of IsoDraw? It really would make this software much more productive if things could be adjusted to meet the needs of each user.Thanks for any help,Keith
I would like to edit the default line styles to add more line styles that are available to all graphics. Currently I have to create the line styles with each new drawing, is there a way to edit the line styles to add more styles?I would also like to add different sizes and angles of the arrowheads available. I have not seen any information in any of the users manuals.Thanks,Keith
I'm being asked by an author what XML courses she could take to learn aboutwhat is going on behind the scenes. I had three answers:1) Take a DITA class. We don't use DITA but it is "hot" and would providenice examples of data modeling, reuse, inheritance, and many more goodconcepts to have when working behind the scenes in XML.2) Learn about all the things I don't support:
Hello,I was wondering if anyone here can shed some light on why the default behaviour of AE appears a little strange when creating new XML instances using an schema with fixed/required attributes.<xs:attribute name="tipo" type="tf:tipoAttribsNotes" fixed="Fred" use="required" />Problems being:It does not insert them automaticaly when 'insert markup' (like XML Spy or Oxygen!) even though they are the only valid value, and are required for the XML to be valid against the schema.The modify attributes menu lists all possible values of the attribute from the schema, instead of the only valid one you can insert in a particular context.The only apparent work-around (from support) ‘set writeunspecifiedattrs=fixed’ saves a required attributes populated and valid file ok, but does not refresh so you dont see the result until it is reopened!?Maybe i'm missing something, but any experiences and resolutions are most appreciated.RegardsChris
Hi Im a Qa person for illustrations in our concern.Using duplicate command is useful and easier while working.In some cases the illustrators duplicate the hole illustration.Selecting one one object and deleting is difficult.Can any macro could be developed for selecting duplicated objects alone.It would be really helpfull..................
We are using a custom font with Arbortext. For instance, there are characters that normally do not display on screen, such as thin space, en space, em space, non-breakable word space, optional line break. We have replaced the normal display of these character (empty spaces) with a visual representation of the character. For instance, we have replaced the en space for a character that is a caret (V) with the letter "m" superinposed. The character in the font is designated at the correct Unicode (Hex) value of 2003. This works. However, the Non-Breakable Word Space, Unicode (hex) value of 00A0, will not display, nor with it show up on the Insert/Symbol picker.Any ideas?
Hi all, we're using a Unicode font for display on screen. Some special characters are placed in the private use area, which is correctly defined for this font. Unfortunately Arbortext Editor doesn't show the glyphs on the screen but only little boxes. Can anyone help? Best regards, Ulrike.
I've been working with a couple of different FO implementations. When I run the FO in anything except Epic, I have few problems. Epic seems to add to any issues. In doing followup on some of the problems Epic gives me, I am finding that Epic is NOT following the FO standard in many cases. To me, this is unacceptable. How can one expect to really share information developed through other resources when Epic goes off on their own direction?One example (and I am not 100% sure I believe the standard is right, but it is what is there) is in tables (and yes, I agree with Ed that "Tables are the spawn of Satan"). The XSL standards (both 1.0 and 1.1) allow the 'table-body' to contain either (table-row+ | table-cell+). Not sure why I would have table cells without a row, but ... Anyway, I'm finding Epic DOES NOT allow this. The error states I MUST have a table-row wrapping my table-cell's, or processing STOPS with a Java error. The error is explained if one has the Java console open or if one k
Hi,We are currently testing "EPIC-5.4-M080".In the documentation we found that it is possible to use a "sitprefs.xml" and reference this file through the environment variable APTDEPLOYPATH.In the siteprefs.xml there is a part of the form:<environmentvariables> <variable name="" value=""/"></environmentvariables>We want to add as many as possible APT environment variables in this "siteprefs.xml" so every user has the same settings.However if we add the APTCATPATH variable, apparently EPIC doesn't catches it.If we add APTCATPATH outside this siteprefs.xml (where we define APTDEPLOYPATH) Epic finds the catalog.The weird thing is if it is set in siteprefs.xml and I run the following code on the Epic commandline:for ($a in $main::ENV) { if (match($a, "APT")) {$z=$z . "\n" . $a . "=" . $main::ENV["$a"]}} ;eval $z;unsetvar z;I see the APTCATPATH set but Epic can't find the DTD's.Any clue?Kind regards,Michiel
Great News! As you might have already seen, Arbortext Editor 6.0,Arbortext Styler 6.0 and Arbortext Publishing Engine 6.0 are nowavailable for download from the PTC support site. To learn more about exciting enhancements delivered with these products,please visit the Arbortext What's New<">http://www.ptc.com/products/arbortext/whats-new.htm> page! If you have any questions about this release, please let me know. Regards,Mike
Good Day!Hope someone here can shed some light on this situation. Thanks in advance for your attention to this somewhat long post.We have a customer who wants their data in SGML format, rather than the XML of the majority. We do our input and publishing using XML, then change the DTD declaration (and remove , etc.) to point to an "identical" SGML DTD. Seemed to be working fine, until... Someone thought to click the completeness check in Editor this revision cycle with the SGML open. Context checking was still 'on', but the SGML was reporting missing content in a place the XML did not and does not.Changing the PROCEDURE ELEMENT declaration in the SGML DTD to "...(topic | %text; |graphic)*))..." (use an '*' in place of the '+') eliminates the error message. My belief is that the XML parser sees the %text; entity being satisfied (%text;'s '*'s allow for zero content) as also satisfying the '+', but the SGML parser sees the '+' as overriding the entity's '*'s.While it may seem the easy ans
I might be wrong but I believe that the next question and a brainstorming session on the possible answers might throw some light on the issue. <question>Isn't using a remote desktop connection a way to workaround the concept of fixed, node-locked licensing?</question>
that would be my thought> Thanks for the thought Dan,>> I've never seen a PC that allowed more than one connection at a time.> Every PC I ever used doesn't allow a connect if someone else is logged on> (remotely or via console).>> You're right about Terminal Services on a server, and I agree that that> would be unfair. I wonder if the inability to differentiate between a> server with multiple users and a single user PC is the reason they> disallow remote usage. That sounds like a logical reason even if I don't> like it.>> -Andy> \ / Andy Esslinger LM Aero - Tech Order Data> _____-/\-_____ (817) 279-0442 1 Lockheed Blvd, MZ 4285> \_\/_/ (817) 777 3047 Fort Worth, TX 76108-3916>
They don't both return the same error because there are two different parsers, MarkIt (SGML) and Xerces (XML). Like the Help says, MarkIt may allow some constructs on which Xerces will return an error.
1) I have used config event to enable mouse events2)I suspect I must code a callback function of signature MouseDown(Button, Shift, x, y).Haven't been able to connect all the dots and make it work.Can any send me some code examples of how they did it ?
I'm working with Arbortext 5.3, CPA 1.4 and have a 62-sheet illustration. The fig and subfig tags are working fine as far as autonumbering the sheets. However, in the auto-generated table of contents, the figure is listed by its title followed by "(Sheet 1)". Why? The sheet number is not entered in the figure title tag-it is auto generated by the subfigure. Is this output standard or is there something I can do to fix this?Thanks.Kathy Reisler
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.