Recently active
Is there a way to make callout text wrap? Please see attached jpg -- this is what we need it to do. Sometimes it's just 2 lines sometimes it's more. Thanks in Advance!
PTC Arbortext – Technical Authoring Management-and-Delivery Committee Meeting Please join us! Liveworx is at the Boston Convention CenterTuesday, May 16, 2023 3:00 PM-5:00 PMAddress: 415 Summer Street, Boston, MA 02210 Room Assigned 258C Agenda; Welcome from Andy Pieper, Product Roadmaps & Discussion, ServiceMax in the Arbortext World Panel Discussion, Celebrate 41 years of Arbortext and Over 10 years of Creo Illustrate. Note: The Arbortext User Group is hosted and led by ptcuser.org. https://www.ptcuser.org/ Our User Group is a technical committee(TC) on PTC/USER. The name of our User Group is Technical Committee(TC) Technical Authoring and Management.
So, I am writing several manuals in Arbortext, and I have to go into the XML afterward to manually change all the graphics paths from absolute paths to relative paths. This is annoying and time consuming. Is there a setting I can change so that Arbortext always defaults to using relative paths, instead? I have to do this for multiple documents that all have different file/graphics paths. Thank you.
Hi, Did anyone work with ACD - Arbortext content delivery (formerly called as Servgistics), which falls under the deliver model of the overall create-manage-deliver thread. Any insights or documentation references on its business case and possible integration with Windchill would be helpful. I would like to understand if there is a way to downstream data from Windchill to ACD for various stakeholders reference. Thanks in advance.
By: Manpreet Singh - Senior Product Technology Lead, PTC Arbortext manpsingh@ptc.com Question After installing Arbortext Publishing Engine, DCOM configuration must be done as a post installation step as without doing it Arbortext Publishing Engine cannot run successfully Answer Clicking on ‘Launch PE Index Page’ under Tomcat Tab, it does not launch the page or few of the information is not populating correctly/missing. One of the main reason is, DCOM configuration is missed, and it can be set by reading this Help Center topic Configuring Publishing Engine Post Installation Post that restarts Tomcat Services and retest the use case
By: Manpreet Singh - Senior Product Technology Lead, PTC Arbortext manpsingh@ptc.com Question Opening a document in Arbortext Editor does not find its DTD and sometime throws this error? Answer After doing all the modification in the xml document, catalog file, all the possible files & location and if it is still showing parsing error then one can try clearing the cache and .wcf files Please refer this article for clearing the cache https://www.ptc.com/en/support/article/CS000143920
By: Manpreet Singh - Senior Product Technology Lead, PTC Arbortext manpsingh@ptc.com Question Arbortext Publishing Engine does not Identify Apache Tomcat from the system even it is successfully installed Answer Installation Path will be blanked but Tomcat is already installed in the system At the time of installing Tomcat keep the Windows Service name as Tomcat8 because by default, the Windows service is named is named Tomcatn, where n is the major release number of Tomcat (for example, Tomcat8.5). Do not rename the Tomcat service because the Arbortext Publishing Engine Configuration utility will not be able to find it. Having a different name prevents the ability of Arbortext Publishing Engine Configuration to start and stop the service. For more details please refer the help center topic Installing Tomcat
Hello! I am attempting to modify numbering behaviour for a division level 2 element. My customer has a requirement for this element (applied to sect1 in the Docbook DTD) to start at 00, then increment by five for each new sect1. So, 00, 05, 10, 15, and so on. As the only increment available is by one, I have been investigating the APP Funtion Numbering module in Styler (currently at 8.1.2.1). The relevant section has this code: if ( argv.countAs != '' ) {var number = formatting.fish[ template.numberingFish ][ argv.countAs ];if ( number == '' || number == null ) {number = startAt;} else {number = Number(number) + 1;}formatting.fish[ template.numberingFish ][ argv.countAs ] = number.toString();if ( argv.numberXPath == '' ) {argv.numberXPath = number;argv.initialNumber = 0;}} If I change the line 'number = Number(number) + 1' to 'number = Number(number) + 5', the sect1s increment by 5, but so does everything else with a Division style. I need to test for which div
Hello,I have created an XUI dialog box with a tree control. I would like to know how to fill a tree control with ACL code.I want to fill the treecontrol with an xml node (and child nodes).David
Seeking advice from any Arbortext Developer in C++ who has successfully accessed the Arbortext IDOMEventListener class. Objective, add a custom left mouse click to the interface. There are no ACL calls for the mouse interface.Attached is the Class view in Visual Studio V2022.There is one undocumented page, C++ sample in the knowledge base shows AttachListener in 10 lines. Any advice welcomed will share the magic.
By: Manpreet Singh - Senior Product Technology Lead, PTC Arbortext manpsingh@ptc.com Question Getting below error “The user xxx does not have a valid Windchill license to use the server http://abc.com/Windchill with Arbortext. Arbortext requires a PTC Author, PTC Windchill Base, PTC Windchill Advanced, or PTC Windchill Premium license.” when connecting from Arbortext Editor(client) to Windchill Server despite that user has the VALID license? Answer Step 1: Add that xxx user under any of the above profile mentioned in the snapshot/CMS Diagnostic dialog in Windchill > Site > Profiles > License Profiles and search for these license profile. Below is just an example for adding the user under ‘PTC Author License profile’ Step 2: Click on ‘i’ button and then edit the group Step 3: Click Next and then click ‘+’ for adding that member/user
Getting Error "Unable to obtain a license for optional component PTC Arbortext Composer". This is for Arbortext 8.1. The Department manager has purchased floating licenses for about 12 people, most of which work remotely..
Tuesday, May 16 at 3:00 PM - 5:00 PM EDTLiveworx is at the Boston Convention Center Address: 415 Summer Street, Boston, MA 02210BCEC Meeting Room 258C. Agenda:Welcome from Andy Pieper, Product Roadmaps & Discussion, ServiceMax in the Arbortext World Panel Discussion, Celebrate 41 years of Arbortext and over 10 years of Creo Illustrate
Hi Gang,Have an annoying problem when opening an AutoCAD drawing in IsoDraw 7.4. When I open the drawing I notice there are several lines shooting out in all different directions. When I activate the line I will notice one is snapped to another line, the other end is just floating out in space. I can select the endpoint of the line in IsoDraw and connect it to the point where it belongs with no problem. My question is why is it doing this action. I look at the AutoCAD drawing and the lines are in the correct location in the initial drawing. Any ideas on what might be causing this issue and how to correct the problem?
Hi,which default graphic processor is used by the editor to display graphics of any format. For example the docbook applicatoin allows different types of graphic formats. I wonder which tool is used to display them in the editorThanks for help.BR, Pia
Hello everyone, has anyone deployed Arbortext Editor in Azure? I am working on setting up a FlexNet license host triad (using 3 Windows VMs) to host our floating licenses. I assume we will deploy Arbortext Editor itself using Azure Virtual Desktops (AVD) where a license can then be checked out from the license pool by the user. Thus far I've hit communication issues between the FlexNet hosts that I'm trying to resolve by looking into networking and license configuration. I just wanted to check with the community to see if this was done by someone else in Azure or perhaps in AWS and if they have any high-level guidance. Thanks!
Hello,I am working on an APP stylesheet in Styler 8.1.2. The XML (Docbook) contains some simple ordered and itemized lists - when I preview or publish to PDF, long lines which wrap are causing the entire sentence to drop down by one line relative to the item.The code that produces the above is as follows: <orderedlist> <listitem> <para><?Pub _font Posture="italic"?>Line 1<?Pub /_font?></para> </listitem> <listitem> <para>Line 2. Form 6377, VHP Series Four P9394GSI with ESM Operation &amp; Maintenance Manual (previous production engines)</para> </listitem> </orderedlist><itemizedlist> <listitem> <para><?Pub _font Posture="italic"?>Line 1<?Pub /_font?></para> </listitem> <listitem> <para>Line 1 &amp; 2. Form 6377, VHP Series Four</para> </listitem> </itemizedlist><itemizedlist> <listitem> <para>Form 6377, VHP
I've been using Arbortext Editor for a while. We've set up the system to be able to make translation packages and save/interact with Windchill. Once the translation package is created, the files (bookmaps, concepts, procedures, references, etc.) are saved to a local folder. Is there a way to see what the pdf of the new pdf of this book before putting the files back on Windchill? The issue I'm having is the page breaks in the English file don't always work for the translated book, because usually the other language has more letters/words than English. The page breaks for Spanish, for example, don't line up and end up looking really bad for books that are completed and saved & released on Windchill, but I can't figure out how to see what the pdf is going to look like before putting it on Windchill (which releases the files as if they are totally completed). I can publish English files while creating them to see where page breaks need to be, no problem.
Hello, Does anyone know when will PTC upload the recording of the Webinar : Arbortext Editor and Publishing Engine 8.2 Arbortext Styler 8.2 Arbortext Layout Developer 12.2 that happened on Feb 14th, 2023? Thanks in advance! Amar
I upgraded to Arbortext 8.2.0.1 and now see that my topicref titles are appearing as zeros in my bookmaps. This occurs in Column View only. I ran the "Update Stylesheet for Editor", but no change. Ideas?
Hi Gang, I was working in IsoDraw 7.4 and I noticed that my "Layers" window would resize the width. I looked at the IsoDraw_7.4_Prefences.prf but was unable to decipher the formatting. Here is what I see when I open the preference file;Usually I will a starting comment line showing the structure of the section, it does not show in this instance. Could someone please tell what the numbers represent? I don't want to go changing numbers and just see what happens. Thank You,Keith
Ok I think I am having a brain fart here! I have updated to IsoDraw 7.4 when it is installed this is what my banner looks like. In my preferences I have load 3D CADprocess load at startup checked.What I need to do to get CADprocess to activate in my IsoDraw session? Keith
Hi Gang,Just updated to IsoDraw 7.4 trying to set things up and had a couple of questions. Where are the toolbars located in 7.3 and where should they go in 7.4? Where should the ISM files be located in 7.4? I have accumulated several macros over the years and want to be sure I can access those files. Is there a file high archy located anywhere so I can see the file structure of IsoDraw? Thanks,Keith
Our stylesheet caters for our whole manual to run in a two column layout. So if I have an illustration that is in a table (page wide) and the topic has a long title (heading), the heading runs over to the second line, which looks odd (see below). How do I change/edit a [concept type] topic to be page wide?
This release supports the ability to run Editor or Styler 8.1.x.x and 8.2.0.1 on the same system. It also contains bug fixes. 8.2.0.0 will no longer be available for download. PTC recommends that customers who have previously downloaded 8.2.0.0 should uninstall 8.2.0.0 and move to 8.2.0.1.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.