Skip to main content
Yogesh.TAnswer
Apr 3, 2025 11:08 AM UTC

Create curve, use edge - Sweep cut with triangle sketch. 

6 replies

Yogesh.TAnswer
Apr 3, 2025 11:08 AM UTC

Create curve, use edge - Sweep cut with triangle sketch. 

Apr 3, 2025 2:10 PM UTC

Does the cut have to remain centered on the varying thickness?

pobsdAuthor
Apr 3, 2025 2:37 PM UTC

Hi Dale, Yes, that needs to be centered on the varying thickness.

Apr 3, 2025 3:04 PM UTC

Use sweep with two trajectories.

Select on edge and hold Ctrl to select the second edge.

There will be two points when you start the sketch, attach triangle vertices to each one and constrain the third as needed.

kdirth_0-1743692645843.png

 

Apr 10, 2025 5:11 AM UTC

Hello @pobsd, 

 

It looks like you have some responses from our community members. If any of these replies helped you solve your question please mark the appropriate reply as the Accepted Solution. 

Of course, if you have more to share on your issue, please let the Community know so other community members can continue to help you.

Thanks,
Vivek N.
Community Moderation Team.

Apr 3, 2025 7:25 PM UTC

If the depth is uniform use two trajectories by use edge, create a triangle that two corners are constrainer to two trajectories respectively as long as triangle height (Groove depth) is uniform. If not it becomes more complex by need to add a thirs trajectory. Try it out. see image attached. Hope that helps with some trials and final hit....